th50vsf3582 TOSHIBA Semiconductor CORPORATION, th50vsf3582 Datasheet - Page 19
![no-image](/images/manufacturer_photos/0/6/670/toshiba_semiconductor_corporation_sml.jpg)
th50vsf3582
Manufacturer Part Number
th50vsf3582
Description
Sram And Flash Memory Mixed Multi-chip Package
Manufacturer
TOSHIBA Semiconductor CORPORATION
Datasheet
1.TH50VSF3582.pdf
(50 pages)
SIMULTANEOUS READ/WRITE OPERATION
operation enables the device to simultaneously write data to or erase data from a bank while the device reads data
from another bank.
banks. Banks are switched using bank addresses (A20 to A15). For bank blocks and addresses, refer to the Block
Address Table and Block Size Table.
the operating modes in which simultaneous operation can be performed.
cannot read data from addresses which are not selected for operation in the same bank. Data from such addresses
can be read using the Program Suspend or Erase Suspend function.
OPERATING MODES
The TH50VSF3582/3583AASB features a Simultaneous Read/Write operation. The Simultaneous Read/Write
The TH50VSF3582/3583AASB has a total of nine banks: 0.5 Mbits × 1 bank, 3.5 Mbits × 1 bank, and 4 Mbits × 7
The Simultaneous Read/Write operation cannot perform multiple operations in a bank. The table below shows
Note that during Auto Program execution or Auto Block Erase operation, the Simultaneous Read/Write operation
SIMULTANEOUS READ/WRITE OPERATION
Read mode
ID Read mode
Auto Program mode
Fast Program mode
Program Suspend mode
Auto Block Erase mode
Auto Multiple Block Erase mode
Erase Suspend mode
Program Suspend while Erase Suspend
CFI mode
(1) Command mode only is valid.
(2) Includes when Acceleration mode is in use.
(3) If the selected bank exists in all banks, simultaneous operation is not supported.
including Block Protect and Data Polling. When using the device, reference the timing charts and flow charts
together with the description below.
Read Mode
high-speed random access as asynchronous ROM.
operation. A software reset releases ID Read mode and the lock state when automatic operation ends
abnormally, and sets to Read mode. A hardware reset terminates operation of the device and resets to Read
mode. When reading the data without changing the address immediately after power on, either input a
hardware reset or change CEF from H to L.
In addition to Read, Write, and Erase modes, the TH50VSF3582/3583AASB features many functions
To read data from the memory cell array, set the device to Read mode. In Read mode, the device can perform
The device is automatically set to Read mode immediately after power on or after completion of automatic
(1)
(2)
ONE BANK STATUS
(3)
TH50VSF3582/3583AASB
OTHER BANK STATUS
Read mode
2001-06-08 19/50