n82802 Intel Corporation, n82802 Datasheet - Page 33

• Manufacturer Part Number: n82802
• Description: Firmware Hub Fwh
• Manufacturer: Intel Corporation

5.
5.1.
5.2.
Datasheet
Table 7.
Note:
Note:
R
Electrical Specifications
Absolute Maximum Ratings
Case temperature under bias:......................... –10 °C to +85 °C
Storage temperature: ................................... –65 °C to +125 °C
Supply voltage with respect to VSS ..................-0.2 V to 4.1 V
Voltage On Any Pin (except V
V
Output short-circuit current: ...................................... 100 mA
Operating Conditions
PP
1.
2.
3.
4.
5.
1.
Symbol
voltage: ........................................... –0.5 V to +14.0 V
Temperature and VCC
V
T
CC
All specified voltages are with respect to GND. The minimum DC voltage on the V
During transitions, this level may undershoot to –2.0 V for periods of <20 ns. During transitions,
this level may overshoot to V
The maximum DC voltage on V
Output shorted for no more than one second. No more than one output is shorted at a time. This
note applies only to non-PCI outputs.
Connection to supply of V
Do not violate processor or chipset limitations on the INIT# pin.
This temperature requirement differs from the normal commercial operating condition of flash
memories.
C
Operating temperature
V
CC
supply voltage (3.3 V ± 0.3 V)
Parameter
PP
):–0.5 V to +VCC + 0.5 V
HH
CC
is allowed for a maximum cumulative period of 80 hours.
+ 2.0 V for periods of <20 ns.
PP
may overshoot to +14.0 V for periods of <20 ns.
Notes
1
Min.
(1,2,4)
3.0
(1,2,5)
0
(3)
Max.
+85
3.6
*WARNING: Stressing the device
beyond
Ratings”
damage. These are stress ratings
only.
“Operating
recommended and extended exposure
beyond the “Operating Conditions”
may affect device reliability.
Intel
®
Unit
°C
V
82802AB/AC Firmware Hub
Operation
the
may
Case temperature
Conditions”
“Absolute
Test Condition
cause
PP
beyond
pin is –0.5 V.
permanent
Maximum
is
33
not
the