MC68HC12 MOTOROLA [Motorola, Inc], MC68HC12 Datasheet - Page 348

• Manufacturer Part Number: MC68HC12
• Description: The MC68HC912DT128A microcontroller unit (MCU) is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit
• Manufacturer: MOTOROLA [Motorola, Inc]

MSCAN Controller
18.12.2 Identifier Registers (IDRn)
Technical Data
348
ADDR
1. x is 4, 5, 6, or 7 depending on which buffer RxFG, Tx0, Tx1, or Tx2 respectively.
$01x0
$01x1
$01x2
$01x3
(1)
REGISTER
IDR0
IDR1
IDR2
IDR3
The identifiers consist of either 11 bits (ID10–ID0) for the standard, or 29
bits (ID28–ID0) for the extended format. ID10/28 is the most significant
bit and is transmitted first on the bus during the arbitration procedure.
The priority of an identifier is defined to be highest for the smallest binary
number.
SRR — Substitute Remote Request
IDE — ID Extended
Figure 18-13. Standard Identifier Mapping
This fixed recessive bit is used only in extended format. It must be set
to 1 by the user for transmission buffers and will be stored as received
on the CAN bus for receive buffers.
This flag indicates whether the extended or standard identifier format
is applied in this buffer. In case of a receive buffer the flag is set as
being received and indicates to the CPU how to process the buffer
identifier registers. In case of a transmit buffer the flag indicates to the
msCAN12 what type of identifier to send.
R/W
W
W
W
W
R
R
R
R
0 = Standard format (11-bit)
1 = Extended format (29-bit)
BIT 7
ID10
ID2
MSCAN Controller
ID9
ID1
6
ID8
ID0
5
RTR
ID7
4
IDE(0)
ID6
3
MC68HC912DT128A — Rev 4.0
ID5
2
ID4
1
MOTOROLA
BIT 0
ID3