SA58631TK PHILIPS [NXP Semiconductors], SA58631TK Datasheet - Page 17

• Manufacturer Part Number: SA58631TK
• Description: 3 W BTL audio amplifier
• Manufacturer: PHILIPS [NXP Semiconductors]

Philips Semiconductors
17. Abbreviations
18. Revision history
Table 10:
SA58631
Preliminary data sheet
Document ID
SA58631_1
Revision history
Release date
20051201
[4]
[5]
[6]
[7]
[8]
[9]
Table 9:
Acronym
BTL
CMOS
DAP
ESD
NPN
PCB
PNP
RMS
THD
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the
solder cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink
on the top side, the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45° angle to the solder wave
direction. The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger
than 0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered
pre-mounted on flex foil. However, the image sensor package can be mounted by the client on a flex foil by
using a hot bar soldering process. The appropriate soldering profile can be provided on request.
Hot bar soldering or manual soldering is suitable for PMFP packages.
Abbreviations
Data sheet status
Preliminary data sheet
Description
Bridge Tied Load
Complementary Metal Oxide Silicon
Die Attach Paddle
ElectroStatic Discharge
Negative-Positive-Negative
Printed-Circuit Board
Positive-Negative-Positive
Root Mean Squared
Total Harmonic Distortion
Rev. 01 — 1 December 2005
Change notice
-
Doc. number
SA58631_1
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
3 W BTL audio amplifier
Supersedes
-
SA58631
17 of 19