AT88RF1354_09 ATMEL [ATMEL Corporation], AT88RF1354_09 Datasheet - Page 13

• Manufacturer Part Number: AT88RF1354_09
• Description: 13.56 MHz Type B RF Reader Specification
• Manufacturer: ATMEL [ATMEL Corporation]

4.4.6. C7 [29]
4.4.7. Xtal1 [4]
4.4.8. Xtal2 [5]
4.5.
4.5.1. Test1 [7]
4.5.2. Test2 [16]
4.5.3. Test3 [17]
4.5.4. TestD [11]
4.5.5. TestR [31]
4.5.6. Rmod [34]
4.6.
4.6.1. N.C. [18, 28, 30, 33, 36]
8547B–RFID–3/09
C7 bypass capacitor pin. Bypass capacitance of 47 nF for the analog circuits must be connected between the C7 pin
and V
dielectric and a working voltage of 10 volts minimum may be used.
Crystal pin 1. A 13.56 MHz crystal must be connected between Xtal1 and Xtal2.
Crystal pin 2. A 13.56 MHz crystal must be connected between Xtal1 and Xtal2.
Test Pin Descriptions
Test input pin 1. This pin must be connected to V
Test input pin 2. This pin must be connected to V
Test input pin 3. This pin must be connected to V
Test output pin D. This test output must be left open by the user.
Test output pin R. This test output must be left open by the user.
Test pin Rmod. This pin must be connected to V
Other Pins
No Connect pins. These package pins are not used and can be left open by the user.
SS
A. This capacitor must be placed within 3 mm of the package. Any 47 nF ceramic capacitor with X5R or X7R
13.56 MHz Type B RF Reader Specification
SS
SS
SS
SS
_Ant on the board.
on the board to prevent the IC from entering test mode.
on the board to prevent the IC from entering test mode.
on the board to prevent the IC from entering test mode.
13