NAND08GAH0A NUMONYX [Numonyx B.V], NAND08GAH0A Datasheet - Page 47

• Manufacturer Part Number: NAND08GAH0A
• Manufacturer: NUMONYX [Numonyx B.V]

NAND08GAH0A, NAND16GAH0D
Table 20.
1. The addressing capability for 8-bit address resolution is 2
2. The response is R1 when the selecting from Standby to Transfer state, and R1b when selecting from Disconnected state to
3. The response is R1 and R1b, for read and write operations, respectively.
Table 21.
1. The default block length is as specified in
2. The data transferred must not cross a physical block boundary unless RD_BLK_MISALIGN is set in the CSD.
CMD16
CMD17
CMD18
CMD12
CMD13
CMD14
CMD15
CMD19
index
Index
Cmd
Cmd
Programming state.
Type
Type
adtc
adtc
adtc
adtc
ac
ac
ac
ac
Basic commands for read-only devices (class 0) (continued)
Block oriented Read commands (class 2)
[15:0] stuff bits
[15:0] stuff bits
[31:0] stuff bits
[31:0] stuff bits
[31:0] stuff bits
[31:0] block
[31:16] RCA
Argument
[31:0] data
[31:16] RCA
[31:0] data
Argument
address
address
length
Response
Response
R1/R1b
R1
R1
R1
R1
R1
R1
Section 8.3: Card specific data register
-
(3)
READ_MULTIPLE_BLOCK
READ_SINGLE_BLOCK
STOP_TRANSMISSION
GO_INACTIVE_STATE
SET_BLOCKLEN
32
Abbreviation
Abbreviation
BUSTEST_W
BUSTEST_R
= 4 Gbytes.
SEND_STAT
(CSD).
Selects block length (in bytes) for all
following block commands (Read and
Write)
Reads a block of the size selected by
the SET_BLOCKLEN command
Continuously send blocks of data until
interrupted by a Stop command.
Forces the device to stop
transmission.
Asks the addressed device to send
its Status Register.
Reads the reversed bus test data
pattern from a device.
Sets the device to Inactive state to
prevent communication breakdowns
in the stack of devices.
Sends the bus test data pattern to
the device.
(1)
Command description
Command description
Commands
47/116
(2)