ADP3301AR-32 Analog Devices, ADP3301AR-32 Datasheet - Page 3

• Manufacturer Part Number: ADP3301AR-32
• Description: High Accuracy anyCAP 100 mA Low Dropout Linear Regulator
• Manufacturer: Analog Devices

REV. 0
ABSOLUTE MAXIMUM RATINGS*
Input Supply Voltage . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V
Shutdown Input Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V
Error Flag Output Voltage . . . . . . . . . . . . . . . –0.3 V to +16 V
Noise Bypass Pin Voltage . . . . . . . . . . . . . . . . –0.3 V to +5 V
Power Dissipation . . . . . . . . . . . . . . . . . . . Internally Limited
Operating Ambient Temperature Range . . . –55 C to +125 C
Operating Junction Temperature Range . . . –55 C to +125 C
Storage Temperature Range . . . . . . . . . . . . –65 C to +150 C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300 C
*This is a stress rating only; functional operation of the device at these or any other
Model
ADP3301AR-2.7
ADP3301AR-3
ADP3301AR-3.2
ADP3301AR-3.3
ADP3301AR-5
Contact the factory for the availability of other output voltage options.
*SO = Small Outline.
Model
ADP3300
ADP3302
ADP3304
ADP3303
ADP3306
NOTES
1
2
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADP3301 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
See individual data sheets for detailed ordering information.
SO = Small Outline, SOT = Surface Mount, TSSOP = Thin Shrink Small
Outline.
conditions above those indicated in the operation section of this specification is not
implied. Exposure to absolute maximum rating conditions for extended periods
may affect device reliability.
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . +215 C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . +220 C
JA
JC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 C/W
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 C/W
Other Members of anyCAP™* Family
Output
Current
50 mA
100 mA
100 mA
200 mA
300 mA
ORDERING GUIDE
Voltage Output
2.7 V
3.0 V
3.2 V
3.3 V
5.0 V
Package
Option
SOT-23
SO-8
SO-8
SO-8
SO-8,TSSOP-14 High Accuracy,
2
Comments
High Accuracy
Dual Output
Dual Output with
Separate Grounds
High Accuracy
High Current
Package Option*
SO-8
SO-8
SO-8
SO-8
SO-8
1
–3–
Pin
1 & 2
3
4
5
6
7 & 8
Mnemonic
OUT
NR
GND
SD
ERR
IN
PIN FUNCTION DESCRIPTIONS
PIN CONFIGURATION
GND
OUT
OUT
NR
3.2, 3.3 or 5 volts output voltage. By-
pass to ground with a 0.47 F or larger
capacitor. Pins 1 and 2 must be con-
nected together for proper operation.
reduction of the output noise. (See text
for details.) No connection if not used.
ground to disable the regulator output.
When shutdown is not used, this pin
should be connected to the input pin.
to indicate that the output is about to
go out of regulation.
be connected together for proper
operation.
Function
Output of the Regulator, fixed 2.7, 3.0,
Noise Reduction Pin. Used for further
Ground Pin.
Active Low Shutdown Pin. Connect to
Open Collector Output which goes low
Regulator Input. Pins 7 and 8 must
PIN FOR 5V DEVICE
1
2
3
4
(Not to Scale)
ADP3301
TOP VIEW
WARNING!
8
7
6
5
IN
IN
ERR
SD
ADP3301
ESD SENSITIVE DEVICE