HY5DU561622CT-D HYNIX [Hynix Semiconductor], HY5DU561622CT-D Datasheet - Page 21

• Manufacturer Part Number: HY5DU561622CT-D
• Description: 256M-P DDR SDRAM
• Manufacturer: HYNIX [Hynix Semiconductor]

EXTENDED MODE REGISTER SET (EMRS)
The Extended Mode Register controls functions beyond those controlled by the Mode Register; these additional func-
tions include DLL enable/disable, output driver strength selection(optional). These functions are controlled via the bits
shown below. The Extended Mode Register is programmed via the Mode Register Set command ( BA0=1 and BA1=0)
and will retain the stored information until it is programmed again or the device loses power.
The Extended Mode Register must be loaded when all banks are idle and no bursts are in progress, and the controller
must wait the specified time before initiating any subsequent operation. Violating either of these requirements will
result in unspecified operation.
Rev. 0.3 / Oct. 2003
BA1
0
* This part do not support /QFC function, A2 must be programmed to Zero.
BA0
BA0
0
1
1
A12
MRS Type
An~A3
EMRS
MRS
0
-
A11
A10
A2~A0
Valid
A9
-
Operating Mode
A8
A7
All other states reserved
Normal Operation
Operating Mode
A6
A5
A4
A3
A2
0*
A1
0
1
HY5DU561622CT-D4/D43
HY5DU56422CT-D4/D43
HY5DU56822CT-D4/D43
DS
A1
Half Strength Driver
Full Strength Driver
Impedance Control
Output Driver
A0
DLL
0
1
A0
DLL enable
Enable
Diable
21