C8051F555-IMR Silicon Labs, C8051F555-IMR Datasheet - Page 35

• Manufacturer Part Number: C8051F555-IMR
• Description: 8-bit Microcontrollers - MCU 50 MIPS 16 kB 2 kB CAN2.0 SPI
• Manufacturer: Silicon Labs

Specifications of C8051F555-IMR

• Rohs: yes
• Core: 8051
• Processor Series: C8051
• Data Bus Width: 8 bit

Notes:
General
Solder Mask Design
Stencil Design
Card Assembly
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. This Land Pattern Design is based on the IPC-7351 guidelines.
3. All metal pads are to be non-solder mask defined (NSMD). Clearance between the solder mask and the
4. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure
5. The stencil thickness should be 0.125 mm (5 mils).
6. The ratio of stencil aperture to land pad size should be 1:1 for all perimeter pads.
7. A 2x2 array of 1.10 mm x 1.10 mm openings on a 1.30 mm pitch should be used for the center ground
8. A No-Clean, Type-3 solder paste is recommended.
9. The recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body
Dimension
metal pad is to be 60 m minimum, all the way around the pad.
good solder paste release.
pad.
Components.
C1
C2
X1
E
Table 4.8. QFN-24 Landing Diagram Dimensions
3.90
3.90
0.20
Min
Figure 4.8. QFN-24 Landing Diagram
0.50 BSC
Max
4.00
4.00
0.30
Rev. 1.1
Dimension
X2
Y1
Y2
C8051F55x/56x/57x
2.70
0.65
2.70
Min
Max
2.80
0.75
2.80
35