C8051F575-IMR Silicon Labs, C8051F575-IMR Datasheet - Page 81

• Manufacturer Part Number: C8051F575-IMR
• Description: 8-bit Microcontrollers - MCU 50 MIPS 16 kB 2 kB SPI UART I2C
• Manufacturer: Silicon Labs

Specifications of C8051F575-IMR

• Rohs: yes
• Core: 8051
• Processor Series: C8051
• Data Bus Width: 8 bit

10. CIP-51 Microcontroller
The MCU system controller core is the CIP-51 microcontroller. The CIP-51 is fully compatible with the
MCS-51™ instruction set; standard 803x/805x assemblers and compilers can be used to develop soft-
ware. The MCU family has a superset of all the peripherals included with a standard 8051. The CIP-51
also includes on-chip debug hardware (see description in Section 27), and interfaces directly with the ana-
log and digital subsystems providing a complete data acquisition or control-system solution in a single inte-
grated circuit.
The CIP-51 Microcontroller core implements the standard 8051 organization and peripherals as well as
additional custom peripherals and functions to extend its capability (see Figure 10.1 for a block diagram).
The CIP-51 includes the following features:








10.1. Performance
The CIP-51 employs a pipelined architecture that greatly increases its instruction throughput over the stan-
dard 8051 architecture. In a standard 8051, all instructions except for MUL and DIV take 12 or 24 system
clock cycles to execute, and usually have a maximum system clock of 12 MHz. By contrast, the CIP-51
core executes 70% of its instructions in one or two system clock cycles, with no instructions taking more
than eight system clock cycles.
Fully Compatible with MCS-51 Instruction Set
50 MIPS Peak Throughput with 50 MHz Clock
0 to 50 MHz Clock Frequency
Extended Interrupt Handler
Reset Input
Power Management Modes
On-chip Debug Logic
Program and Data Memory Security 
Rev. 1.1
C8051F55x/56x/57x
81