DS3172 Maxim Integrated, DS3172 Datasheet - Page 85
![no-image](/images/no-image-200.jpg)
DS3172
Manufacturer Part Number
DS3172
Description
Network Controller & Processor ICs Dual DS3/E3 Single Chip Transceiver
Manufacturer
Maxim Integrated
Datasheet
1.DS3171.pdf
(234 pages)
Specifications of DS3172
Part # Aliases
90-31720-000
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
- Current page: 85 of 234
- Download datasheet (2Mb)
A FEBE error is generated by forcing the C
inserted one error at a time, or continuously. The FEBE error insertion rate (single or continuous) is programmable.
Each error type (framing, P-bit parity, C-bit parity, or FEBE) has a separate enable. Continuous error insertion
mode inserts errors at every opportunity. Single error insertion mode inserts an error at the next opportunity when
requested. the framing multi-error modes (SEF or OOMF) insert the indicated number of error(s) at the next
opportunities when requested; i.e., a single request will cause multiple errors to be inserted. The requests can be
initiated by a register bit(TSEI) or by the manual error insertion input (TMEI). The error insertion initiation type
(register or input) is programmable. The insertion of each particular error type is individually enabled. Once all error
insertion has been performed, the data stream is passed on to overhead insertion.
10.6.5.4 Transmit C-Bit DS3 Overhead Insertion
Overhead insertion can insert any (or all) of the DS3 overhead bits into the DS3 frame. The DS3 overhead bits X
X
TOHSOF). The P-bits (P
the input bit and the internally generated bit). The DS3 overhead insertion is fully controlled by the transmit
overhead interface. If the transmit overhead data enable signal (TOHEN) is driven high, then the bit on the transmit
overhead signal (TOH) is inserted into the output data stream. Insertion of bits using the TOH signal overwrites
internal overhead insertion.
10.6.5.5 Transmit C-Bit DS3 AIS/Idle Generation
C-bit DS3 AIS/Idle generation overwrites the data stream with AIS or an Idle signal. If transmit Idle is enabled, the
data stream payload is forced to a 1100 pattern with two ones immediately following each DS3 overhead bit. M
M
overwritten with the values one, zero, zero, and one (1001) respectively. X
P
If transmit AIS is enabled, the data stream payload is forced to a 1010 pattern with a one immediately following
each DS3 overhead bit. M
F
are overwritten with 11. P
output DS3 frame. And, C
10.6.5.5.1 Receive C-Bit DS3 Frame Format
The DS3 frame format is shown in
referred to as the far-end SEF/AIS bits). P
are the multiframe alignment bits that define the multiframe boundary. F
define the subframe boundary. Note: Both the M-bits and F-bits define the DS3 frame boundary. C
Application Identification Channel (AIC). C
Far-End Alarm and Control (FEAC) signal. C
are the C-bit parity bits used for path error monitoring. C
used for remote path error monitoring. C
C
10.6.5.5.2 Receive C-Bit DS3 Overhead Extraction
Overhead extraction extracts all of the DS3 overhead bits from the C-bit DS3 frame. All of the DS3 overhead bits
X
P
bit). The C
overhead controller.
X1
2
1
1
1
62
2
, P
, P
, X
, P
, and M
, F
, and C
2,
2
1
2
X2
, P
, P
, C
C
, F
31
1
2
31
, P
, M
, C
3
X3
63
13
, C
bits are overwritten with the values zero, one, and zero (010) respectively. F
, and F
2
are unused, and have a value of one. C
32
bit is sent over to the receive FEAC controller. The C
, M
X
32
, F
, and C
, and C
X
XY
, F
, and C
X4
XY
33
, and C
bits are overwritten with the values one, zero, zero, and one (1001) respectively. X
33
are overwritten with the calculated payload parity from the previous output DS3 frame.
1
1
bits are output as an error indication (modulo 2 addition of the calculated parity and the
X1
, P
1
and P
XY
, M
, C
2,
XY
can be sourced from the transmit overhead interface (TOHCLK, TOH, TOHEN, and
2
X2
C
, and M
are output on the receive overhead interface (ROH, ROHSOF, and ROHCLK). The
31
, and C
2
) and C
, C
32
Figure
, and C
3
X3
bits are overwritten with the values zero, one, and zero (010) respectively.
31
51
(X ≠ 3) are overwritten with 000. AIS will overwrite a transmit Idle signal.
1
12
, C
41
, C
and P
21
, C
10-14. X
is reserved for future network use, and has a value of one. C
33
32
, C
52
, and C
42
are overwritten with the calculated payload parity from the previous
, and C
22
, and C
2
, and C
are the parity bits used for line error monitoring. M
71
1
, C
33
and X
53
85
43
72
bits are received as an error mask (modulo 2 addition of
41
23
are the path maintenance data link (or HDLC) bits. C
, and C
bits in a single multiframe to zero. FEBE error(s) can be
, C
are unused, and have a value of one. C
2
42
are the Remote Defect Indication (RDI) bits (also
, and C
73
51
, C
are unused, and have a value of one.
52
43
, and C
are the Far-End Block Error (FEBE) bits
XY
1
are the subframe alignment bits that
and X
53
bits are sent to the receive HDLC
2
are overwritten with 11. And,
X1
, F
X2
, F
X3
, and F
31
, C
1
, M
32
X4
2
, and C
11
1
, and M
13
bits are
and X
is the
is the
61
33
1
1
2
3
,
,
,
Related parts for DS3172
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![MAX3261CCJ](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Single +5V, fully integrated, 1.25Gbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX3263CAG](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Single +5V, fully integrated, 155Mbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX7528KCWP](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
MAX7528KCWPMaxim Integrated Products [CMOS Dual 8-Bit Buffered Multiplying DACs]
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX8809AETL+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Manufacturer:
Maxim Integrated Products
Datasheet:
![MAX1535CETJ+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Highly Integrated Level 2 SMBus Battery Chargers
Manufacturer:
Maxim Integrated Products
Datasheet:
![DS2741N+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Current Monitor and Accumulator with Integrated Sense Resistor; ; Temperature Range: -40°C to +85°C
Manufacturer:
Maxim Integrated Products
![MAX13450EAUD+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
![MAX13451EAUD+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
![MAX17497BATE+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
QFN 16/A°/AC-DC and DC-DC Peak-Current-Mode Converters with Integrated Step
Manufacturer:
Maxim Integrated Products
![MAX17502FATB+T](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
TDFN/A/65V, 1A, 600KHZ, SYNCHRONOUS STEP-DOWN REGULATOR WITH INTEGRATED SWI
Manufacturer:
Maxim Integrated Products
![MAX1978EVKIT](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
Integrated Temperature Controller f
Manufacturer:
Maxim Integrated Products
![MAX2606EUT+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
![MAX2608EUT+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
![MAX2831EVKIT+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
EVALUATION KIT/2.4GHZ TO 2.5GHZ 802.11G/B RF TRANSCEIVER WITH INTEGRATED PA
Manufacturer:
Maxim Integrated Products
![MAX4888CETI+](/images/manufacturer_photos/0/4/417/maxim_integrated_products_tmb.jpg)
Part Number:
Description:
QFN/E/DUAL PCIE/SATA HIGH SPEED SWITCH WITH INTEGRATED BIAS RESISTOR
Manufacturer:
Maxim Integrated Products
Datasheet: