IS42S16800D-7TL ISSI, Integrated Silicon Solution Inc, IS42S16800D-7TL Datasheet - Page 6
![IC SDRAM 128MBIT 143MHZ 54TSOP](/photos/7/23/72310/is42s16800d-7tl_sml.jpg)
IS42S16800D-7TL
Manufacturer Part Number
IS42S16800D-7TL
Description
IC SDRAM 128MBIT 143MHZ 54TSOP
Manufacturer
ISSI, Integrated Silicon Solution Inc
Datasheet
1.IS42S16800D-7TL.pdf
(62 pages)
Specifications of IS42S16800D-7TL
Package / Case
54-TSOP II
Memory Size
128M (8Mx16)
Format - Memory
RAM
Memory Type
SDRAM
Speed
143MHz
Interface
Parallel
Voltage - Supply
3 V ~ 3.6 V
Operating Temperature
0°C ~ 70°C
Data Bus Width
16 bit
Maximum Clock Frequency
143 MHz
Access Time
6.5 ns, 5.4 ns
Supply Voltage (max)
3.6 V
Supply Voltage (min)
3 V
Maximum Operating Current
130 mA
Maximum Operating Temperature
+ 70 C
Minimum Operating Temperature
0 C
Mounting Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
706-1020
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
IS42S16800D-7TL
Manufacturer:
ISSI
Quantity:
20
Company:
Part Number:
IS42S16800D-7TL
Manufacturer:
ISSI
Quantity:
240
Part Number:
IS42S16800D-7TL
Manufacturer:
ISSI
Quantity:
20 000
Company:
Part Number:
IS42S16800D-7TLI
Manufacturer:
ISSI
Quantity:
1 000
Part Number:
IS42S16800D-7TLI
Manufacturer:
ISSI
Quantity:
20 000
PIN FUNCTIONS
IS42S81600D,
6
DQ
DQ
BA0, BA1
Symbol
A0-A11
DQML,
DQMH
DQM
0
CAS
CKE
RAS
V
V
CLK
-DQ
0
WE
V
V
CS
-DQ
DDQ
SSQ
DD
SS
7
15
or
Power Supply Pin
Power Supply Pin
Power Supply Pin
Power Supply Pin
Input/Output
Input Pin
Input Pin
Input Pin
Input Pin
Input Pin
Input Pin
Input Pin
Input Pin
Input Pin
Input Pin
IS42S16800D
Type
Function (In Detail)
Address Inputs: A0-A11 are sampled during the ACTIVE
command (row-address A0-A11) and READ/WRITE command (column address A0-A9
(x8), or A0-A8 (x16); with A10 defining auto precharge) to select one location out of the
memory array in the respective bank. A10 is sampled during a PRECHARGE command
to determine if all banks are to be precharged (A10 HIGH) or bank selected by
BA0, BA1 (LOW). The address inputs also provide the op-code during a LOAD MODE
REGISTER command.
Bank Select Address: BA0 and BA1 defines which bank the ACTIVE, READ, WRITE or
PRECHARGE command is being applied.
CAS, in conjunction with the RAS and WE, forms the device command. See the
"Command Truth Table" for details on device commands.
The CKE input determines whether the CLK input is enabled. The next rising edge of the
CLK signal will be valid when is CKE HIGH and invalid when LOW. When CKE is LOW,
the device will be in either power-down mode, clock suspend mode, or self refresh
mode. CKE is an asynchronous input.
CLK is the master clock input for this device. Except for CKE, all inputs to this device
are acquired in synchronization with the rising edge of this pin.
The CS input determines whether command input is enabled within the device.
Command input is enabled when CS is LOW, and disabled with CS is HIGH. The device
remains in the previous state when CS is HIGH.
DQML and DQMH control the lower and upper bytes of the I/O buffers. In read
mode,DQML and DQMH control the output buffer. WhenDQML orDQMH is LOW, the
corresponding buffer byte is enabled, and when HIGH, disabled. The outputs go to the
HIGH impedance state whenDQML/DQMH is HIGH. This function corresponds to OE
in conventional DRAMs. In write mode,DQML and DQMH control the input buffer. When
DQML or DQMH is LOW, the corresponding buffer byte is enabled, and data can be
written to the device. WhenDQML or DQMH is HIGH, input data is masked and cannot
be written to the device. For IS42S16800D only.
For IS42S81600D only.
Data on the Data Bus is latched on DQ pins during Write commands, and buffered for
output after Read commands.
RAS, in conjunction with CAS and WE, forms the device command. See the "Command
Truth Table" item for details on device commands.
WE, in conjunction with RAS and CAS, forms the device command. See the "Command
Truth Table" item for details on device commands.
V
V
V
V
DDQ
DD
SSQ
SS
is the device internal ground.
is the device internal power supply.
is the output buffer ground.
is the output buffer power supply.
Integrated Silicon Solution, Inc. — www.issi.com
07/28/08
Rev. E