MA240026 Microchip Technology, MA240026 Datasheet - Page 201

• Manufacturer Part Number: MA240026
• Description: Daughter Cards & OEM Boards PIC24FJ16MC102 Plug-In Module
• Manufacturer: Microchip Technology

Specifications of MA240026

• Rohs: yes
• Data Bus Width: 16 bit
• Description/function: PIC24F 28 Pin QFN to 100 Pin Plug-in-Module
• Interface Type: I2C, SPI, UART
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3 V to 3.6 V

REGISTER 21-1:
© 2011 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9-8
Note 1:
RTCEN
R/W-0
R/W-0
2:
3:
(2)
The RCFGCAL register is only affected by a POR.
A write to the RTCEN bit is only allowed when RTCWREN = 1.
This bit is read-only. It is cleared to ‘0’ on a write to the lower half of the MINSEC register.
RTCEN: RTCC Enable bit
1 = RTCC module is enabled
0 = RTCC module is disabled
Unimplemented: Read as ‘0’
RTCWREN: RTCC Value Registers Write Enable bit
1 = RTCVALH and RTCVALL registers can be written to by the user
0 = RTCVALH and RTCVALL registers are locked out from being written to by the user
RTCSYNC: RTCC Value Registers Read Synchronization bit
1 = RTCVALH, RTCVALL and ALCFGRPT registers can change while reading due to a rollover ripple
0 = RTCVALH, RTCVALL or ALCFGRPT registers can be read without concern over a rollover ripple
HALFSEC: Half-Second Status bit
1 = Second half period of a second
0 = First half period of a second
RTCOE: RTCC Output Enable bit
1 = RTCC output enabled
0 = RTCC output disabled
RTCPTR<1:0>: RTCC Value Register Window Pointer bits
Points to the corresponding RTCC Value registers when reading RTCVALH and RTCVALL registers;
the RTCPTR<1:0> value decrements on every read or write of RTCVALH until it reaches ‘00’.
RTCVAL<15:8>:
00 = MINUTES
01 = WEEKDAY
10 = MONTH
11 = Reserved
RTCVAL<7:0>:
00 = SECONDS
01 = HOURS
10 = DAY
11 = YEAR
R/W-0
resulting in an invalid data read. If the register is read twice and results in the same data, the data
can be assumed to be valid.
U-0
—
RCFGCAL: RTCC CALIBRATION AND CONFIGURATION REGISTER
‘1’ = Bit is set
W = Writable bit
RTCWREN
R/W-0
R/W-0
(2)
RTCSYNC HALFSEC
R/W-0
R-0
Preliminary
(3)
CAL<7:0>
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R-0
(3)
PIC24FJ16MC101/102
RTCOE
R/W-0
R/W-0
x = Bit is unknown
R/W-0
R/W-0
RTCPTR<1:0>
(1)
DS39997B-page 201
R/W-0
R/W-0
bit 8
bit 0