SDIN2C2-1G-T SanDisk, SDIN2C2-1G-T Datasheet - Page 22

• Manufacturer Part Number: SDIN2C2-1G-T
• Description: IC INAND FLASH 1GB 169FBGA
• Manufacturer: SanDisk

Specifications of SDIN2C2-1G-T

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 8G (1G x 8)
• Speed: 50MHz
• Interface: SD/SPI Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -25°C ~ 85°C
• Package / Case: 169-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Revision 1.1
© 2007 SanDisk Corporation
3.4.4
3.4.5
3.4.6
3.4.7
3.4.8
3.5
Card Status Register
SD Status Register
Relative Card Address Register
SD Card Configuration Register
SD Card Registers in SPI Mode
Data Interchange Format and Card Sizes
The Card Status Register (CSR) transmits the card’s status information (which may be
stored in a local status register) to the host. The CSR is defined in Section 4.10.1 in the
SDA Physical Layer Specification, Version 2.00.
The SD Status Register (SSR) contains status bits that are related to iNAND proprietary
features and may be used for future applications. The SD Status structure is described in
Section 4.10.2 in the SDA Physical Layer Specification, Version 2.00.
The 16-bit Relative Card Address (RCA) Register carries the card address published by
the card during the card identification. Refer to Section 5.4 in the SDA Physical Layer
Specification, Version 2.00 for more information.
The SD Card Configuration Register (SCR) is in addition to the CSD Register. The SCR
provides information about special features in SanDisk iNAND. For more information,
refer to Section 5.6 in the SDA Physical Layer Specification, Version 2.00.
All registers are accessible in SPI Mode. Their format is identical to the format in the SD
Bus Mode, however a few fields are irrelevant in SPI Mode. In SPI Mode, the Card Status
Register has a different, shorter, format as well. Refer to Section 7.4 in the SDA Physical
Layer Specification, Version 2.00. for more details.
In general, a file system provides structure for iNAND data. The SD Card File System
Specification, published by the SD Association, describes the file format system
implemented in the SanDisk iNAND.
CRC
---
Field
CRC7
---
PRELIMINARY
CSD Value
3-8
CRC
Not used, always “1”
Chapter 3 – iNAND Interface Description
SanDisk iNAND Product Manual
Description
02/09/07