STM3210B-EVAL STMicroelectronics, STM3210B-EVAL Datasheet - Page 25

• Manufacturer Part Number: STM3210B-EVAL
• Description: BOARD EVALUATION FOR STM32
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210B-EVAL

• Contents: Fully Assembled Evaluation Board
• Processor To Be Evaluated: STM32F10x
• Data Bus Width: 32 bit
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6048

UM0435
2.4.2
Note:
To stop the product presentation slide display and speech, push the SEL push-button. The
message shown in
Figure 19. End of slide show
At the end of the product presentation or if the presentation was stopped, the user only has
to press any key of the joystick to exit and return to the Product Presentation submenu.
Calendar
The STM32F10xxx features a real-time clock (RTC) that provides a set of continuously
running counters. These can be used, with suitable software, to implement a clock-calendar
function. The counter values can be written to set the current time of the system.
This submenu is used to configure the time, date and alarm. The date, time and alarm
settings are not lost when the board is powered off owing to the battery connected to the
V
when the main digital supply (V
To be able to use the battery to back up the RTC, the JP11 jumper must be in the position 1-
2 in the STM3210B-EVAL board.
In any submenu, if the time and date parameters have not yet been configured, the
message shown in
Figure 20. Setting the time and date
The user has the choice to set or not the time, year, month and day. Press any key (except
for SEL) to ignore the prompt and abort the configuration sequence. Press on SEL and
follow the setting sequence to set the time and date.
BAT
pin. The V
BAT
Figure 19
Figure 20
Exit: Push joystick
pin supplies power to the RTC unit, allowing the RTC to operate even
End of slide show
is displayed.
is displayed on the LCD screen.
Doc ID 13534 Rev 5
DD
) is turned off.
Running the demonstration
25/57