STM3210B-EVAL STMicroelectronics, STM3210B-EVAL Datasheet - Page 26

• Manufacturer Part Number: STM3210B-EVAL
• Description: BOARD EVALUATION FOR STM32
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210B-EVAL

• Contents: Fully Assembled Evaluation Board
• Processor To Be Evaluated: STM32F10x
• Data Bus Width: 32 bit
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6048

Running the demonstration
26/57
Time submenu
This submenu is divided into two items that allow the user to display or set the current time.
Figure 21. Time Adjust submenu
Figure 22. Time Show submenu
To exit the Time Show submenu press the SEL push-button. To exit Time submenu select
the Return line and press the SEL push-button.
Time Adjust: After the evaluation board is powered up, the user has to select this
submenu to change the default time (00:00:00) to the current time. Once "Time Adjust"
has been selected, the first digit of the hour field can be changed. Pressing the "UP"
button will display the current value plus one. Pressing the "DOWN" button will display
the previous digit value. After setting the digit value, press "SEL", the cursor
automatically jumps to the next digit. When all the time digits have been set, the "Time"
submenu appears. Some digit values are limited to a range of values depending on the
field (hour, minute or seconds). The following message (with the default time or the
current time) is displayed on the LCD when this submenu is selected.
Time Show: this item displays the current time. If time and date have not been
configured before, a message is displayed, that gives the choice to set the time and
date or, to exit to the upper submenu. When this submenu is selected, the message
shown in
Figure 22
appears on the LCD. In the example, the time has not been set yet.
Doc ID 13534 Rev 5
UM0435