STM3210B-EVAL STMicroelectronics, STM3210B-EVAL Datasheet - Page 8

• Manufacturer Part Number: STM3210B-EVAL
• Description: BOARD EVALUATION FOR STM32
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210B-EVAL

• Contents: Fully Assembled Evaluation Board
• Processor To Be Evaluated: STM32F10x
• Data Bus Width: 32 bit
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6048

Functional description
1.1
1.2
1.3
1.4
1.5
1.6
1.6.1
1.6.2
1.7
1.7.1
8/57
Power control
The evaluation board can be powered by an external 5 V supply or from the USB connector,
all other required voltages are provided by on-board voltage regulators.
Clocking
Two clock sources are available on the STM3210B-EVAL evaluation board:
Reset control
The Reset can be generated by hardware or software:
Debug JTAG interface
Software debug is done via the standard ARM® JTAG connection: 20-pin IDC (insulation
displacement connector) for connection to the standard ARM host interface.
Serial wire debugger interface
The Serial Wire Debug Port (SWD-DP) provides a 2-pin (clock + data) interface to the AHP-
AP port.
Display devices
LCD
A color LCD module is mounted on the STM3210B-EVAL board. It is interfaced through the
SPI2 peripheral.
LED
Four general-purpose LEDs are available. They are used as a display.
Interfaces
RS232
The STM32F10xxx evaluation board (STM3210B-EVAL) provides two on-board RS-232
serial ports. Both RS232 ports are terminated by DB9 connectors.
32 kHz Crystal for embedded RTC.
8 MHz Crystal for STM32F10xxx.
Reset button: activates the RESET input when pressed
JTAG reset
Doc ID 13534 Rev 5
UM0435