P0305 Terasic Technologies Inc, P0305 Datasheet - Page 25

• Manufacturer Part Number: P0305
• Description: KIT MAX II MICRO
• Manufacturer: Terasic Technologies Inc
• Series: MAX® IIr
• Type: FPGAr

Specifications of P0305

• Contents: Evaluation Board, Cable(s), Software and Documentation
• For Use With/related Products: EPM2210F324
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.
3.
4.
5.
6.
7.
8.
Figure 4.7. The connection setup for the pattern generator demo with MAX II Micro board.
Please NOTE the orientation of the 40-pin cable when connecting the DIP 40-pin male
connector on the PROT_A, as shown in Figure 4.6.
Open Quartus II and locate DEN_LCM_TEST.pof under the directory \ DEN_demonstrations \
DEN_LCM_TEST \ of the CD-ROM included.
Download the bitstream (DEN_LCM_TEST.pof) to the MAX II Micro board.
Once the download is finished, Plug out the USB cable from the MAX II Micro board and
re-plug it in to power up and reset the MAX II CPLD device.
Press BUTTON1 on the MAX II Micro board to reset the circuit.
Press BUTTON2 on the MAX II Micro board to switch to the other pattern
The following table summarizes the pattern types of this exercise.
Color bar.
50% gray level pattern.
White pattern.
Gray pattern
Pattern
23
MMK User Manual