DK-EMB-3C120N Altera, DK-EMB-3C120N Datasheet - Page 46

• Manufacturer Part Number: DK-EMB-3C120N
• Description: KIT DEV EMB CYCLONE III EDITION
• Manufacturer: Altera
• Series: Cyclone® IIIr
• Type: FPGAr

Specifications of DK-EMB-3C120N

• Contents: Board, Cables, CD(s), USB-Blaster™, Power Supply
• Architecture: PLD/FPGA
• Silicon Manufacturer: Altera
• Core Architecture: FPGA
• Core Sub-architecture: Cyclone
• Silicon Core Number: EP3C
• Silicon Family Name: Cyclone III
• Rohs Compliant: Yes
• For Use With/related Products: EP3C120
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2589

A–6
Figure A–3. Program/Configure Options
Restoring the Factory Design to the Flash Device
Cyclone III FPGA Development Kit User Guide
11. Turn on Page_0 and OPTION_BITS options in the Program/Configure column
12. Click Start. The message window details the flash writing progress to successful
You have now successfully programmed the flash device with a configuration for
your board. To configure the board from the flash device, power cycle the board as
described in
Powering on the board causes the flash device to load a new configuration into the
FPGA device. The Configuration Done LED lights up and the hardware functions
associated with the design take effect.
To restore the development board to factory conditions, repeat the steps for writing a
new POF to the flash device as described in
page
that correspond to the CFI_512MB device
to the flash page zero and the option bit register.
completion. Flash writing to one page, as in this case, can take five to six minutes.
A–4, except select the cycloneIII_3c120_dev_factory_recovery.pof file.
“Powering Up the Board” on page
“Programming the Flash Device” on
(Figure
4–2.
Restoring the Factory Design to the Flash Device
Appendix A: Programming the Flash Device
A–3). This results in writes only
September 2010 Altera Corporation