AT32UC3L-EK Atmel, AT32UC3L-EK Datasheet - Page 390

• Manufacturer Part Number: AT32UC3L-EK
• Description: KIT EVAL AVR32 UC3 MCU
• Manufacturer: Atmel
• Type: MCUr

Specifications of AT32UC3L-EK

• Contents: *
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Core Sub-architecture: UC3L
• Kit Contents: Board
• Features: USB / Battery Powered, Board Controller / Bootloader
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Tool Type: Starter Kit
• Cpu Core: AVR 8
• Data Bus Width: 8 bit
• Processor Series: AT32
• Processor To Be Evaluated: AT32UC3L064
• Interface Type: USB, Capacitive Touch
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.6.6
19.6.6.1
19.6.6.2
19.6.6.3
19.6.6.4
19.6.6.5
32099F–11/2010
LIN Errors
Bit Error
Inconsistent Synch Field Error
Parity Error
Checksum Error
Slave Not Responding Error
This error is generated when the USART is transmitting and if the transmitted value on the Tx
line is different from the value sampled on the Rx line.
If a bit error is detected, the transmission is aborted at the next byte border.
This error is generated in Slave node configuration if the Synch Field character received is other
than 0x55.
This error is generated if the parity of the identifier is wrong. This error can be generated only if
the parity feature is enabled (PARDIS = 0).
This error is set if the received checksum is wrong. This error can be generated only if the
checksum feature is enabled (CHKDIS = 0).
This error is set when the USART expects a response from another node (NACT = SUB-
SCRIBE) but no valid message appears on the bus within the time frame given by the maximum
length of the message frame, TFrame_Maximum (see
if the USART does not expect any message (NACT = PUBLISH or NACT = IGNORE).
Section
AT32UC3L016/32/64
19.6.5.12). This error is disabled
390