STM3210E-EVAL STMicroelectronics, STM3210E-EVAL Datasheet - Page 15

• Manufacturer Part Number: STM3210E-EVAL
• Description: BOARD EVALUTION FOR STM32 512K
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210E-EVAL

• Contents: Evaluation Board
• Processor To Be Evaluated: STM32F103Z
• Data Bus Width: 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6438

UM0488
2.20
NOR Flash
128 Mbit NOR Flash is connected to bank1 NOR/PSRAM2 of the FSMC interface. The 16-
bit operation mode is selected by a pull-up resistor connected to the BYTE pin of the NOR
Flash. Write protection can be enabled or disabled by jumper JP5.
Table 14.
Three different NOR 128-Mbit references can be present on the evaluation board depending
on component availability.
Table 15.
These three references are not identical in terms of ID code, speed, timing or block
protection. The demonstration firmware and the software library delivered with the board
support these three NOR Flash references. However, during the development of your
application software, you must verify which NOR reference is implemented on your board
(component referenced as U2 on silkscreen and schematic), and take its characteristics into
account.
JP5
Jumper
Write protection is enabled when JP5 is fitted.
Write protection is disabled when JP5 is not fitted (default setting).
NOR Flash related jumpers
NOR Flash reference
S29GL128P90FFIR20
M29W128GH70ZA6E
M29W128GL70ZA6E
Reference
Doc ID 14220 Rev 5
Description
Hardware layout and configuration
Manufacturer
NUMONYX
NUMONYX
SPANSION
15/48