STM3210E-EVAL STMicroelectronics, STM3210E-EVAL Datasheet - Page 8

• Manufacturer Part Number: STM3210E-EVAL
• Description: BOARD EVALUTION FOR STM32 512K
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210E-EVAL

• Contents: Evaluation Board
• Processor To Be Evaluated: STM32F103Z
• Data Bus Width: 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6438

Hardware layout and configuration
2.2
2.3
2.4
8/48
Boot option
The STM3210E-EVAL evaluation board can boot from:
The boot option is configured by setting the switches BOOT0 and BOOT1.
Table 2.
Clock source
Two clock sources are available on the STM3210E-EVAL evaluation board for STM32F103
and RTC.
Reset source
The reset signal of the STM3210E-EVAL evaluation board is low active and the reset
sources include:
Table 3.
BOOT0
BOOT1
JP19
Jumper
Switch
Embedded user Flash
System memory with boot loader for ISP
Embedded SRAM for debugging
X2, 32KHz crystal for embedded RTC.
X1, 8MHz crystal with socket for STM32F103ZGT6 microcontroller, it can be removed
from socket when internal RC clock is used.
Reset button B1
Debugging tools from JTAG connector CN7 and trace connector CN9
Daughterboard from CN11
STM3210E-EVAL boots from User Flash when BOOT0 is set as shown
to the right. BOOT1 is not required in this configuration.
(Default setting)
STM3210E-EVAL boot from Embedded SRAM when BOOT0 and
BOOT1 are set as shown to the right.
STM3210E-EVAL boot from System Memory when BOOT0 and
BOOT1 are set as shown to the right.
Enables reset of the STM32F103ZGT6 embedded JTAG TAP controller each time a
system reset occurs. JP19 connects the TRST signal from the JTAG connection with the
system reset signal RESET#. Default setting: not fitted
Boot related switches
Reset related jumper
Doc ID 14220 Rev 5
Boot from
Description
0 <
0 <
0 <
configuration
Switch
> 1
> 1
> 1
UM0488
Boot 0
Boot 1
Boot 0
Boot 1
Boot 0