M38000T2-CPE Renesas Electronics America, M38000T2-CPE Datasheet - Page 26

• Manufacturer Part Number: M38000T2-CPE
• Description: EMULATOR BASE UNIT 740
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of M38000T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: 740 Family MCUs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M38000T2-CPE User’s Manual
2.6.2 Connecting the Emulator MCU
There are two ways available to connect the emulator MCU and M38000T2-CPE according to the emulator MCU type.
(1) For RSS and RLSS Type Emulator MCU
When the emulator MCU is RSS or RLSS type, connect the tip probe M38000T2-CPEC of the M38000T2-CPE emulator to
the emulator MCU directly. To connect them, align the No. 1 pins.
(2) For RFS and RLFS Type Emulator MCU
When the emulator MCU is RFS or RLFS type, connect the converter board PCA4933 (included) between the tip probe
M38000T2-CPEC of the M38000T2-CPE emulator and the emulator MCU. To connect them, align the No. 1 pins.
Figure 2.7 Connecting the emulator and emulator MCU
R20UT0213EJ0600 Rev.6.00
Oct. 20, 2010
Notes on Connecting Emulator MCU:
Emulator MCU
(RSS/RLSS type)
Emulator probe
When the emulator MCU is RSS or RLSS type.
• Always shut OFF the emulator and the user system when connecting and disconnecting the user system.
• Take care not to attaché the converter board in a wrong direction. It may cause a fatal damage to the compact
Otherwise the internal circuit may cause a break.
emulator.
(separately available)
Converter board
User system
No.1 pin
Bevel-edged and marked
No.1 pin
CAUTION
When the emulator MCU is RFS or RLFS type.
Emulator MCU
(RFS/RLFS type)
Emulator probe
Converter board
PCA4933
(separately available)
Converter board
User system
No.1 pin
No.1 pin
Bevel-edged and marked
No.1 pin
Bevel-edged
Page 26 of 82
2. Setup