M38000T2-CPE Renesas Electronics America, M38000T2-CPE Datasheet - Page 27

• Manufacturer Part Number: M38000T2-CPE
• Description: EMULATOR BASE UNIT 740
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of M38000T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: 740 Family MCUs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M38000T2-CPE User’s Manual
2.6.3 Connecting the User System
To connect the emulator MCU and user system, a converter board according to the package is required. For details on
connecting to the user system, go to the M38000T2-CPE page from the following Renesas Tools Homepage and click
"Options" on the left menu to select the target MCU.
http://www.renesas.com/tools
When you have not prepared the user system, you can use a temporary target board (separately available).
2.6.4 Connecting the Target Status Cables
Connect the VCC, GND and RESET clips on the tip of the target status cables to the VCC, GND and RESET pins of the user
system respectively.
(1) VCC cable (red)
(2) GND cable (black)
(3) RESET cable (white)
Figure 2.8 Connecting the Target Status Cables
R20UT0213EJ0600 Rev.6.00
Oct. 20, 2010
Notes on Connecting the User System:
5.0V
USB
RESET
POWER
• Take care not to attaché the converter board in a wrong direction. It may cause a fatal damage to the compact
• Always shut OFF the emulator and the user system when connecting and disconnecting the user system.
MADE IN JAPAN
emulator.
Otherwise the internal circuit may cause a break.
SAFE
RESET
RUN
POWER
POWER
CLOCK
M38000T2-CPE
COMPACT EMULATOR
STATUS
STATUS
SYSTEM
TARGET
GOOD
WHITE:RESET
RLSS/RLFS
TARGET
BLACK:GND
RSS/RFS
RED:VCC
Black
Red
Omitted
CAUTION
White
User system
RESET VCC
GND
Page 27 of 82
2. Setup