M38000T2-CPE Renesas Electronics America, M38000T2-CPE Datasheet - Page 73

• Manufacturer Part Number: M38000T2-CPE
• Description: EMULATOR BASE UNIT 740
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of M38000T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: 740 Family MCUs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M38000T2-CPE User’s Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Figure 5.1 Flowchart to remedy the troubles
R20UT0213EJ0600 Rev.6.00
Oct. 20, 2010
Emulator system started up normally
“Connected” is displayed on the “Debug”
Turning on the power of the emulator
tab of the emulator debugger’s output
Init dialog box of emulator
debugger displayed
Check LEDs display
of the emulator
window.
Normal
Normal
http://www.renesas.com/tools
Not normal
Not normal or error displayed
Refer to 5.2. (1) “When the LEDs of the M38000T2-CPE Do
Not Display Normally” on page 74.
1. Check the operating environment etc. of the emulator
2. Reinstall the emulator debugger.
3. Refer to 5.2. (2) “MCU Setting Dialog Box Does Not
debugger.
Appear at Debugger Startup” on page 75.
(See the 740 Compact Emulator Debugger user's manual)
5. Troubleshooting
Page 73 of 82