HW-SPAR3E-SK-UK-G Xilinx Inc, HW-SPAR3E-SK-UK-G Datasheet - Page 40

• Manufacturer Part Number: HW-SPAR3E-SK-UK-G
• Description: KIT STARTER SPARTAN-3E
• Manufacturer: Xilinx Inc

Specifications of HW-SPAR3E-SK-UK-G

• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Development Tool Type: Hardware / Software - Starter Kit
• Mcu Supported Families: Spartan-3E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: HW-SPAR3E-SK-US-UK-G; HW-SPAR3E-SK-US-UK-G

Chapter 4: FPGA Configuration Options
40
The programming software again prompts for the PROM type to be programmed. Select
xcf04s and click OK, as shown in
Before programming, choose the programming options available in
the Erase Before Programming option erases the Platform Flash PROM completely
before programming, ensuring that no previous data lingers. The Verify option checks
that the PROM was correctly programmed and matches the downloaded configuration
bitstream. Both these options are recommended even though they increase overall
programming time.
The Load FPGA option immediately forces the FPGA to reconfigure after programming
the Platform Flash PROM. The FPGA’s configuration mode pins must be set for Master
Serial mode, as defined in
Figure 4-24: Program the XCF04S Platform Flash PROM
Figure 4-25: Select XCF04S Platform Flash PROM
www.xilinx.com
Table 4-1, page
Figure
4-25.
27. Click OK when finished.
Spartan-3E FPGA Starter Kit Board User Guide
UG230_c4_26_022806
UG230 (v1.2) January 20, 2011
Figure
4-26. Checking
UG230_c4_25_022806
R