PCDIDE COMPILER Custom Computer Services Inc (CCS), PCDIDE COMPILER Datasheet - Page 231

• Manufacturer Part Number: PCDIDE COMPILER
• Description: PCD C-COMPILER PIC24, DSPIC
• Manufacturer: Custom Computer Services Inc (CCS)
• Type: Compilerr

Specifications of PCDIDE COMPILER

• For Use With/related Products: Microchip PIC24/dsPIC®
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 429-1008

output_bit( )
Syntax:
Parameters:
Returns:
Function:
Availability:
Requires:
Examples:
Example Files:
Also See:
output_bit (pin, value)
Pins are defined in the devices .h file. The actual number is a bit address. For
example, port a (byte 0x2C2 ) bit 3 would have a value of 0x2C2*8+3 or 5651
. This is defined as follows: #define PIN_A3 5651 . The PIN could also be a
variable. The variable must have a value equal to one of the constants (like
PIN_A1) to work properly. The tristate register is updated unless the FAST_I0
mode is set on port A. Note that doing I/0 with a variable instead of a constant will
take much longer time. Value is a 1 or a 0.
undefined
Outputs the specified value (0 or 1) to the specified I/O pin. The
method of setting the direction register is determined by the last #USE
*_IO directive.
All devices.
Pin constants are defined in the devices .h file
output_bit( PIN_B0, 0);
// Same as output_low(pin_B0);
output_bit( PIN_B0,input( PIN_B1 ) );
// Make pin B0 the same as B1
output_bit( PIN_B0,
// Output the MSB of data to
// B0 and at the same time
// shift B1 into the LSB of data
int16 i=PIN_B0;
ouput_bit(i,shift_left(&data,1,input(PIN_B1)));
//same as above example, but
//uses a variable instead of a constant
ex_extee.c
input(), output_low(), output_high(), output_float(), output_x(),
#USE
shift_left(&data,1,input(PIN_B1)));
FAST_IO,
with
9356.c
#USE
STANDARD_IO,
General Purpose I/O
#USE
FIXED_IO,
217