CHIPPROG-40 Phyton Inc, CHIPPROG-40 Datasheet - Page 132

• Manufacturer Part Number: CHIPPROG-40
• Description: PROGRAMMER STANDALONE 40-DIP
• Manufacturer: Phyton Inc
• Type: Universal, Stand Aloner

Specifications of CHIPPROG-40

• Contents: Programmer, Cables, CD, Power Adapter
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• Features: Embedded Script Language For Automation Of Routine Operations, Splits Files To Multiple Images
• Rohs Compliant: Yes
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

132
This is the bit definition from the aciprog.h header file:
*// ACI Device Status
#define ACI_DS_OUT_OF_SOCKET
#define ACI_DS_SHIFTED
upside down)
#define ACI_DS_BAD_CONTACT
#define ACI_DS_UNKNOWN
PercentCompl
ete
DeviceStatus
NewDevice
FunctionFail
ed
FunctionName This is either the name of the programming operation (function) being currently
ErrorMessage
ChipProg Device Programmers
0 // Device detected, pin contacts are ok
ACI_StartFunction
While the Executing == TRUE this parameter represents a percentage of the
function completion - from 0 to 100.
This structure member defines insertion of the device into the programmer ZIF
socket if the
of the ACI_DS_XXX* constants in the aciprog.h
This structure member is a flag that acknowledges replacing a programmed device
in the programmer's socket by a new, presumably a blank device. It works only
when the
FALSE while the already programmed chip is still into the socket and has not been
replaced by a new one. After removing the programmed device from the socket the
NewDevice toggles to TRUE.
This is an indicator of the function execution's result. It sets to FALSE when the
ACI_StartFunction
while the operation is in progress. If the programming operation fails and the
parameter Executing becomes FALSE the FunctionFailed flag toggles to TRUE.
executed or the name of the failed function, if the FunctionFalied == TRUE.
== TRUE.
The destination of the error message if the function fails, i.e. the FunctionFalied
Status
ACI_DS_OK
ACI_DS_OUT_OF_SOCKE
T
ACI_DS_SHIFTED
ACI_DS_BAD_CONTACT
ACI_DS_UNKNOWN
device insertion auto detection
device insertion auto detection
launches a programming operation and remains the FALSE
1 // No device in the socket
2 // Wrong device insertion is detected (shifted or inserted
3 // Bad pin contact(s)
4 // Unknown (Auto Detect is probably off)
Description
The device is in the socket and the device's leads are reliably gripped
by the programmer ZIF socket's sprung contacts.
There is no device in the programmer's ZIF socket.
The device's leads are reliably inserted into the socket but the device
is incorrectly positioned in the socket (shifted or inserted upside
dow n). The same status may indicate that the device type selected in
the
programmer's socket.
The device's leads are not reliably gripped by the socket's sprung
contacts. In most cases this is an intermediate situation w hile an
operator is inserting the chip to the socket or is removing it.
It is impossible to detect the status due to the
detection
programmer at all.
Select Device
feature is disabled or this feature is not supported by this
© 2010 Phyton, Inc. Microsystems and Development Tools
does not correspond to the type of the chip in the
function is enabled. The NewDevice ==
function is enabled. See the description
device insertion auto