CHIPPROG-40 Phyton Inc, CHIPPROG-40 Datasheet - Page 33

• Manufacturer Part Number: CHIPPROG-40
• Description: PROGRAMMER STANDALONE 40-DIP
• Manufacturer: Phyton Inc
• Type: Universal, Stand Aloner

Specifications of CHIPPROG-40

• Contents: Programmer, Cables, CD, Power Adapter
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• Features: Embedded Script Language For Automation Of Routine Operations, Splits Files To Multiple Images
• Rohs Compliant: Yes
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

© 2010 Phyton, Inc. Microsystems and Development Tools
3.3.2
ChipProg-40
For the programmers to be used in a multi-programming mode, e.g. connected to one
computer:
Read about the
For the programmer to be used in a single programming mode, e.g. alone:
Powering the
programmer
Connecting to a PC
Starting up
Powering the
programmers
Connecting the
programmers to a
cluster
Starting up
Multi-Programming
Plug the
power adapters to the coaxial connector on the rear panel of the
programmers and make sure that the "Good" green LEDs on each of
them are on.
Connect the USB port of your PC to the USB connector on the rear panel
of the programmer by means of the
to connect the programmer to a USB slot on the computer main unit and
do not connect it through a USB hub, especially through a passive hub.
Start the Phyton ChipProgUSB program; if the programmer passes the
startup test successfully the first dialog prompts you to choose one of the
programmers to work with: ChipProg-48, ChipProg-40 or ChipProg-ISP.
Select the ChipProg-48 and continue. The ChipProgUSB main window
will open and you will be able to work with the tool.
Plug the
programming cluster to the 110/240V outlets. Connect plugs of the power
adapters to the coaxial connectors on the rear panels of all the
programmers and make sure that the "Good" green LEDs on each of
them are on.
Connect the USB ports of your PCs to the USB connectors on the rear
panels of the programmers by means of the
recommended to connect the programmers to USB slots on the computer
main unit and do not connect them through a USB hub, especially
through a passive hub.
Start the Phyton ChipProgUSB - Gang Mode program; if all the
programmers pass the startup test successfully the first dialog prompts
you to assign the number from one to N to each programmer included in
the cluster. To assign the number push a Start button on a top panel of
each programmer one by one. Then the ChipProgUSB main window will
open and you will be able to work with the tool.
power adapter
power adapters
mode.
to the ~110/240V outlet. Connect a plug of the
of each programmer to be connected in one
USB
cable. It is highly recommended
USB
cables. It's highly
Quick Start
33