PIC16F88-I/ML Microchip Technology, PIC16F88-I/ML Datasheet - Page 436

• Manufacturer Part Number: PIC16F88-I/ML
• Description: IC MCU FLASH 4KX14 EEPROM 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F88-I/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16F
• No. Of I/o's: 16
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 368Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: SSP, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28QFN3 - SOCKET TRAN ICE 18DIP/28QFNAC164322 - MODULE SOCKET MPLAB PM3 28/44QFNAC164033 - ADAPTER 28QFN TO 18DIPDV007003 - PROGRAMMER UNIVERSAL PROMATE II
• Lead Free Status / Rohs Status: Details

PICmicro MID-RANGE MCU FAMILY
23.8
23.9
DS31023A-page 23-14
Operation During Sleep
Effects of a Reset
The A/D module can operate during SLEEP mode. This requires that the A/D clock source be set
to RC (ADCS1:ADCS0 = 11). When the RC clock source is selected, the A/D module waits one
instruction cycle before starting the conversion. This allows the SLEEP instruction to be executed,
which eliminates all internal digital switching noise from the conversion. When the conversion is
completed the GO/DONE bit will be cleared, and the result is loaded into the ADRES register. If
the A/D interrupt is enabled, the device will wake-up from SLEEP. If the A/D interrupt is not
enabled, the A/D module will then be turned off, although the ADON bit will remain set.
When the A/D clock source is another clock option (not RC), a SLEEP instruction will cause the
present conversion to be aborted and the A/D module to be turned off (to conserve power),
though the ADON bit will remain set.
Turning off the A/D places the A/D module in its lowest current consumption state.
A device reset forces all registers to their reset state. This forces the A/D module to be turned off,
and any conversion is aborted.
The value that is in the ADRESH:ADRESL registers is not modified for a Power-on Reset. The
ADRESH:ADRESL registers will contain unknown data after a Power-on Reset.
Note:
For the A/D module to operate in SLEEP, the A/D clock source must be set to RC
(ADCS1:ADCS0 = 11). To allow the conversion to occur during SLEEP, ensure the
SLEEP instruction immediately follows the instruction that sets the GO/DONE bit.
Preliminary
1997 Microchip Technology Inc.