PIC24HJ64GP502-E/MM Microchip Technology, PIC24HJ64GP502-E/MM Datasheet - Page 179

• Manufacturer Part Number: PIC24HJ64GP502-E/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-E/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit or 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.0
The Inter-Integrated Circuit (I
complete hardware support for both Slave and
Multi-Master modes of the I
standard, with a 16-bit interface.
The I
• The SCLx pin is clock.
• The SDAx pin is data.
The I
• I
• I
• I
• I
• Serial clock synchronization for I
• I
© 2011 Microchip Technology Inc.
modes of operation.
addressing
addressing
master and slaves
used as a handshake mechanism to suspend and
resume serial transfer (SCLREL control)
collision and arbitrates accordingly
Note 1: This data sheet summarizes the features
2
2
2
2
2
C interface supporting both Master and Slave
C Slave mode supports 7-bit and 10-bit
C Master mode supports 7-bit and 10-bit
C port allows bidirectional transfers between
C supports multi-master operation, detects bus
2
2
C module has a 2-pin interface:
C module offers the following key features:
2: Some registers and associated bits
INTER-INTEGRATED
CIRCUIT™ (I
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
of
PIC24HJ64GPX02/X04
PIC24HJ128GPX02/X04
devices. It is not intended to be a compre-
hensive reference source. To comple-
ment the information in this data sheet,
refer to Section 19. “Inter-Integrated
Circuit™ (I
“dsPIC33F/PIC24H Family Reference
Manual”, which is available from the
Microchip website (www.microchip.com).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
the
2
C™)” (DS70195) of the
2
C™)
2
PIC24HJ32GP302/304,
C serial communication
2
C) module provides
2
C port can be
families
and
of
in
17.1
The hardware fully implements all the master and slave
functions of the I
specifications, as well as 7-bit and 10-bit addressing.
The I
master on an I
The following types of I
• I
• I
• I
For details about the communication sequence in each
of these modes, refer to the “dsPIC33F/PIC24H Family
Reference Manual”. Please see the Microchip website
(www.microchip.com) for the latest dsPIC33F/PIC24H
Family Reference Manual chapters.
17.2
I2CxCON and I2CxSTAT are control and status
registers, respectively. The I2CxCON register is
readable and writable. The lower six bits of I2CxSTAT
are read-only. The remaining bits of the I2CSTAT are
read/write:
• I2CxRSR is the shift register used for shifting data
• I2CxRCV is the receive buffer and the register to
• I2CxTRN is the transmit register to which bytes
• The I2CxADD register holds the slave address
• A status bit, ADD10, indicates 10-bit Address
• The I2CxBRG acts as the Baud Rate Generator
In receive operations, I2CxRSR and I2CxRCV together
form a double-buffered receiver. When I2CxRSR
receives a complete byte, it is transferred to I2CxRCV,
and an interrupt pulse is generated.
internal to the module and the user application
has no access to it
which data bytes are written, or from which data
bytes are read
are written during a transmit operation
mode
(BRG) reload value
2
2
2
C slave operation with 7-bit addressing
C slave operation with 10-bit addressing
C master operation with 7-bit or 10-bit addressing
2
C module can operate either as a slave or a
Operating Modes
I
2
C Registers
2
C bus.
2
C Standard and Fast mode
2
C operation are supported:
DS70293E-page 179