AT32AP7001-ALUT Atmel, AT32AP7001-ALUT Datasheet - Page 615

• Manufacturer Part Number: AT32AP7001-ALUT
• Description: IC MCU 32BIT AVR32 208-LQFP
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7001-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, POR, PWM, WDT
• Number Of I /o: 90
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EBI, ISI, MCI, PS2, SPI, TWI, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 90
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 1 Channel
• Package: 208PQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

Figure 32-9. Data IN Followed By Status OUT Transfer at the End of a Control Transfer
32015G–AVR32–09/09
USB Bus
Packets
RX_BK_RDY
(UDPHS_EPTSTAx)
TX_COMPLT
(UDPHS_EPTSTAx)
Token IN
Device Sends the Last
Data Payload to Host
Data IN
Note: A NAK handshake is always generated at the first status stage token.
Figure 32-10. Data OUT Followed by Status IN Transfer
Note: Before proceeding to the status stage, the software should determine that there is no risk
of extra data from the host (data stage). If not certain (non-predictable data stage length), then
the software should wait for a NAK-IN interrupt before proceeding to the status stage. This pre-
caution should be taken to avoid collision in the FIFO.
Set by Hardware
USB Bus
Packets
RX_BK_RDY
(UDPHS_EPTSTAx)
TX_PK_RDY
(UDPHS_EPTSTAx)
ACK
Token OUT
Host Sends the Last
Data Payload to the Device
Token OUT
Device Sends a
Status OUT to Host
Set by Hardware
Cleared by Firmware
Data OUT
Set by Firmware
Data OUT (ZLP)
Interrupt Pending
ACK
Token IN
ACK
Device Sends a Status IN
to the Host
Cleared by Firmware
Token OUT
Data IN
Set by Hardware
Data OUT (ZLP)
AT32AP7001
ACK
Cleared by Firmware
Clear by Hardware
Interrupt
Pending
ACK
615