AT32AP7001-ALUT Atmel, AT32AP7001-ALUT Datasheet - Page 718

• Manufacturer Part Number: AT32AP7001-ALUT
• Description: IC MCU 32BIT AVR32 208-LQFP
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7001-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, POR, PWM, WDT
• Number Of I /o: 90
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EBI, ISI, MCI, PS2, SPI, TWI, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 90
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 1 Channel
• Package: 208PQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

32015G–AVR32–09/09
• the waveform duty cycle. This channel parameter is defined in the CDTY field of the CDTYx
• the waveform polarity. At the beginning of the period, the signal can be at high or low level.
• the waveform alignment. The output waveform can be left or center aligned. Center aligned
- If the waveform is left aligned, then the output waveform period depends on the counter
source clock and can be calculated:
By using the Master Clock (MCK) divided by an X given prescaler value
(with X being 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, or 1024), the resulting period formula will be:
By using a Master Clock divided by one of both DIVA or DIVB divider, the formula becomes,
respectively:
If the waveform is center aligned then the output waveform period depends on the counter
source clock and can be calculated:
By using the Master Clock (MCK) divided by an X given prescaler value
(with X being 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, or 1024). The resulting period formula will
be:
By using a Master Clock divided by one of both DIVA or DIVB divider, the formula becomes,
respectively:
register.
If the waveform is left aligned then:
If the waveform is center aligned, then:
This property is defined in the CPOL field of the CMRx register. By default the signal starts by
a low level.
waveforms can be used to generate non overlapped waveforms. This property is defined in the
CALG field of the CMRx register. The default mode is left aligned.
(
------------------------------ -
(
----------------------------------------- -
(
---------------------------------------- -
(
--------------------------------------------------- -
X CPRD
CRPD
2
2
duty cycle
×
×
×
duty cycle
MCK
X CPRD
CPRD DIVA
MCK
MCK
×
MCK
×
DIVA
)
×
=
)
)
=
or
(
------------------------------------------------------------------------------------------------------- -
period 1 fchannel_x_clock
(
---------------------------------------------------------------------------------------------------------------------- -
)
(
period 2 ⁄
(
--------------------------------------------- -
or
CRPD
(
--------------------------------------------------- -
2 CPRD
–
MCK
×
×
DIVAB
⁄
) 1 fchannel_x_clock
MCK
–
×
period
⁄
(
)
DIVB
period 2 ⁄
)
)
×
CDTY
×
CDTY
)
) )
AT32AP7001
718