DSPIC30F6012A-30I/PT Microchip Technology, DSPIC30F6012A-30I/PT Datasheet - Page 29

• Manufacturer Part Number: DSPIC30F6012A-30I/PT
• Description: IC DSPIC MCU/DSP 144K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6012A-30I/PT

• Program Memory Type: FLASH
• Program Memory Size: 144KB (48K x 24)
• Package / Case: 64-TFQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• Maximum Clock Frequency: 30 MHz
• Number Of Programmable I/os: 52
• Data Ram Size: 8 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, DM240002, DM330011
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT64PT5 - SOCKET TRAN ICE 64MQFP/TQFPAC164319 - MODULE SKT MPLAB PM3 64TQFPAC30F008 - MODULE SKT FOR DSPIC30F 64TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DSPIC30F6012A30IP

8.5.9
The ERASEP command erases the specified number of
rows of code memory from the specified base address.
The specified base address must be a multiple of 0x40.
Once the erase is performed, all targeted words of
code memory contain 0xFFFFFF.
Expected Response (2 words):
0x1900
0x0002
© 2010 Microchip Technology Inc.
15
Opcode
Length
Num_Rows
Addr_MSB
Addr_LS
Note:
Opcode
Field
Num_Rows
12 11
ERASEP COMMAND
The ERASEP command cannot be used to
erase the Configuration registers or
device ID. Code-protect Configuration
registers can only be erased with the
ERASEB command, while the device ID is
read-only.
0x9
0x3
Number of rows to erase
MSB of 24-bit base address
LS 16 bits of 24-bit base address
Addr_LS
8 7
Description
Length
Addr_MSB
0
8.5.10
The QBLANK command queries the programming exec-
utive to determine if the contents of code memory and
data EEPROM are blank (contains all ‘1’s). The size of
code memory and data EEPROM to check must be
specified in the command.
The Blank Check for code memory begins at 0x0 and
advances toward larger addresses for the specified
number of instruction words. The Blank Check for data
EEPROM begins at 0x7FFFFE and advances toward
smaller addresses for the specified number of data
words.
QBLANK returns a QE_Code of 0xF0 if the specified
code memory and data EEPROM are blank.
Otherwise, QBLANK returns a QE_Code of 0x0F.
Expected Response (2 words for blank device):
0x1AF0
0x0002
Expected Response (2 words for non-blank device):
0x1A0F
0x0002
15
Opcode
Length
PSize
Reserved
DSize
Note:
Reserved
Opcode
Field
12 11
QBLANK COMMAND
The QBLANK command does not check
the system Configuration registers. The
READD command must be used to deter-
mine the state of the Configuration
registers.
0xA
0x3
Length of program memory to check
(in 24-bit words), max of 49152
0x0
Length of data memory to check
(in 16-bit words), max of 2048
PSize
Description
Length
DSize
DS70102K-page 29
0