MCIMX515DJM8C Freescale Semiconductor, MCIMX515DJM8C Datasheet - Page 106

• Manufacturer Part Number: MCIMX515DJM8C
• Description: MULTIMEDIA PROC 529-LFBGA
• Manufacturer: Freescale Semiconductor
• Series: i.MX51r

Specifications of MCIMX515DJM8C

• Core Processor: ARM Cortex-A8
• Core Size: 32-Bit
• Speed: 800MHz
• Connectivity: 1-Wire, EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 128
• Program Memory Type: ROMless
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.8 V ~ 1.15 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 529-LFBGA
• Processor Series: i.MX51
• Core: ARM Cortex A8
• Data Bus Width: 32 bit
• Program Memory Size: 36 KB
• Data Ram Size: 128 KB
• Interface Type: I2C, SPI, SSI, UART, USB
• Maximum Clock Frequency: 200 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 0.8 V to 1.15 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: MCIMX51EVKJ
• Minimum Operating Temperature: - 20 C
• Cpu Speed: 800MHz
• Digital Ic Case Style: BGA
• Supply Voltage Range: 0.8V To 1.15V
• Operating Temperature Range: -20°C To +85°C
• Leaded Process Compatible: Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Electrical Characteristics
9
DISP_UP is predefined in REGISTER
10
DISP_DOWN is predefined in REGISTER
11
DISP_UP is predefined in REGISTER
12
13
Note: DISP#_READ_EN—operand of DC’s MICROCDE READ command to sample incoming data
14
chip-level output delay, board delays, a chip-level input delay, an IPU input delay. This value is chip specific.
4.7.8.8
The IPU supports the following types of asynchronous serial interfaces:
The IPU has four independent outputs and one input. The port can be configured to provide 3, 4, or 5-wire
interfaces.
Figure 63
active-low IPP#_CS signal and the straight polarity of the IPP_CLK signal.
For this interface, a bidirectional data line is used outside the chip. The IPU still uses separate input and
output data lines (IPP_IND_DISPB_SD_D and IPP_DO_DISPB_SD_D). The I/O mux should provide
106
Display control up for read
Display control up for write
Display control down for read
This parameter is a requirement to the display connected to the IPU
Data read point
Loop back delay Tlbd is the cumulative propagation delay of read controls and read data. It includes an IPU output delay, a
1. 3-wire (with bidirectional data line).
2. 4-wire (with separate data input and output lines).
3. 5-wire type 1 (with sampling RS by the serial clock).
4. 5-wire type 2 (with sampling RS by the chip select signal).
depicts the timing diagram of the 3-wire serial interface. The timing diagrams correspond to
Standard Serial Interfaces
i.MX51 Applications Processors for Consumer and Industrial Products, Rev. 4
Tdicdrw
Tdicuw
Tdicur
Tdrp
=
=
=
=
1
-- - T
2
1
-- - T DI_CLK
2
1
-- - T DI_CLK
2
T
⎛
⎝
⎛
⎝
⎛
⎝
DI_CLK
DI_CLK
×
×
×
ceil
×
ceil
ceil
ceil
DISP#_READ_EN
------------------------------------------------ -
DI_CLK_PERIOD
2
---------------------------------------------------- -
---------------------------------------------- -
DI_CLK_PERIOD
---------------------------------------------- -
DI_CLK_PERIOD
2
DI_CLK_PERIOD
2
×
×
×
DISP_DOWN_#
DISP_UP_#
DISP_UP_#
⎞
⎠
⎞
⎠
⎞
⎠
Freescale Semiconductor