DSPIC30F4013-20E/PT Microchip Technology, DSPIC30F4013-20E/PT Datasheet - Page 20

• Manufacturer Part Number: DSPIC30F4013-20E/PT
• Description: IC DSPIC MCU/DSP 48K 44TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F4013-20E/PT

• Program Memory Type: FLASH
• Program Memory Size: 48KB (16K x 24)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, POR, PWM, WDT
• Number Of I /o: 30
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 30
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, DM240002, DM300018, DM330011
• Minimum Operating Temperature: - 40 C
• Package: 44TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 13-chx12-bit
• Number Of Timers: 5
• Core Frequency: 20MHz
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of I/o's: 30
• Flash Memory Size: 48KB
• Supply Voltage Range: 2.5V To 5.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC30F006 - MODULE SKT FOR DSPIC30F 44TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DSPIC30F401320EPT

6.0
6.1
Memory is erased by using an ERASEB, ERASED or
ERASEP command, as detailed in
“Command
erased by row using ERASEP. Data EEPROM can be
erased by row using ERASED. When memory is erased,
the affected memory locations are set to ‘1’s.
ERASEB
Performing a Chip Erase with the ERASEB command
clears all code memory, data EEPROM and code
protection registers. Alternatively, ERASEB can be used
to selectively erase either all code memory or data
EEPROM. Erase options are summarized in
TABLE 6-1:
6.2
Instead
programming, it is possible that you may want to modify
only a section of an already programmed device. In this
situation, Chip Erase is not a realistic option.
Instead, you can erase selective rows of code memory
and data EEPROM using ERASEP and ERASED,
respectively. You can then reprogram the modified
rows with the PROGP and PROGD command pairs. In
these cases, when code memory is programmed,
single-panel programming must be specified in the
PROGP command.
For modification of Advanced Code Protection bits for
a particular segment, the entire chip must first be
erased with the ERASEB command. Alternatively, on
devices that support Advanced Security, individual
segments (code and/or data EEPROM) may be
erased, by suitably changing the MS (Memory Select)
DS70102K-page 20
ERASEB
ERASED
ERASEP
Note 1:
Command
2:
(2)
OTHER PROGRAMMING
FEATURES
Erasing Memory
Modifying Memory
provides
of
The system operation Configuration
registers and device ID registers are not
erasable.
ERASEP cannot be used to erase code-
protect Configuration bits. These bits must
be erased using ERASEB.
Descriptions”. Code memory can be
Entire chip
data EEPROM, or erase by segment
Specified rows of data EEPROM
Specified rows of code memory
bulk-erasing
ERASE OPTIONS
several
(1)
Affected Region
or all code memory or all
Bulk
the
Erase
device
Section 8.5
Table
options.
before
6-1.
field in the ERASEB command. The code-protect
Configuration bits can then be reprogrammed using the
PROGC command.
6.3
The READD command reads the data EEPROM,
Configuration bits and device ID of the device. This
command only returns 16-bit data and operates on
16-bit registers. READD can be used to return the
entire contents of data EEPROM.
The READP command reads the code memory of the
device. This command only returns 24-bit data packed
as described in
READP can be used to read up to 32K instruction words
of code memory.
6.4
At times, it may be necessary to determine the version
of programming executive stored in executive memory.
The QVER command performs this function. See
Section 8.5.11 “QVER Command”
about this command.
6.5
To allow portability of code, the programmer must read
the data EEPROM information from the hexadecimal
file. If data EEPROM information is not present, a
simple warning message should be issued by the
programmer. Similarly, when saving a hexadecimal file,
all data EEPROM information must be included. An
option to not include the data EEPROM information can
be provided.
Microchip Technology Inc. believes that this feature is
important for the benefit of the end customer.
Note:
Note:
Reading Memory
Programming Executive Software
Version
Data EEPROM Information in the
Hexadecimal File
If read or write code protection is enabled
for a segment, no modifications can be
made
protection is disabled. Code protection
can only be disabled by performing a Chip
Erase or by performing a Segment Erase
operation for the required segment.
Reading an unimplemented memory
location
executive to reset. All READD and READP
commands must specify only valid
memory locations.
Section 8.3 “Packed Data
to
causes
© 2010 Microchip Technology Inc.
that
segment
the
for more details
programming
until
Format”.
code