HD6473308RCP10V Renesas Electronics America, HD6473308RCP10V Datasheet - Page 192

• Manufacturer Part Number: HD6473308RCP10V
• Description: MCU 5V 16K,PB-FREE 80-PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/330r

Specifications of HD6473308RCP10V

• Core Size: 8-Bit
• Program Memory Size: 16KB (16K x 8)
• Oscillator Type: Internal
• Core Processor: H8/300
• Speed: 10MHz
• Number Of I /o: 58
• Program Memory Type: OTP
• Ram Size: 512 x 8
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-PLCC
• No. Of I/o's: 58
• Ram Memory Size: 512Byte
• Cpu Speed: 10MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 2
• Digital Ic Case: RoHS Compliant
• Controller Family/series: H8/330
• Peripherals: ADC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply (vcc/vdd): -
• Eeprom Size: -
• Data Converters: -
• Peripherals: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.1 Overview
The H8/330 chip includes a single-channel serial communication interface (SCI) for transferring
serial data to and from other chips. Either the synchronous or asynchronous communication mode
can be selected. Communication control functions are provided by internal registers.
9.1.1 Features
The features of the on-chip serial communication interface are:
• Separate pins for asynchronous and synchronous modes
• Full duplex communication
• Built-in baud rate generator
• Internal or external clock source
• Three interrupts
– Asynchronous mode
– Synchronous mode
The transmitting and receiving sections are independent, so the SCI can transmit and receive
simultaneously. Both the transmit and receive sections use double buffering, so continuous data
transfer is possible in either direction.
Any specified baud rate can be generated.
The baud rate generator can operate on an internal clock source, or an external clock signal input
at the ASCK or CSCK pin.
Transmit-end, receive-end, and receive-error interrupts are requested independently.
The SCI can communicate with a UART (Universal Asynchronous Receiver/Transmitter),
ACIA (Asynchronous Communication Interface Adapter), or other chip that employs standard
asynchronous serial communication. Eight data formats are available.
– Data length: 7 or 8 bits
– Stop bit length: 1 or 2 bits
– Parity: Even, odd, or none
– Error detection: Parity, overrun, and framing errors
The SCI can communicate with chips able to perform clocked serial data transfer.
– Data length: 8 bits
– Error detection: Overrun errors
Section 9. Serial Communication Interface
179