M30620FCAFP#U5 Renesas Electronics America, M30620FCAFP#U5 Datasheet - Page 88

• Manufacturer Part Number: M30620FCAFP#U5
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30620FCAFP#U5

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: M16C
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 87
• Interface Type: SIM/UART
• On-chip Adc: 10-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Timer A
Figure 1.14.9. Timer Ai mode register in event counter mode
Timer Ai mode register
(When using two-phase pulse signal processing)
b6
b5
0
b4
1
b3
0
b2
0
b1
0 1
b0
Note 1: This bit is valid for timer A3 mode register. Timer A2 is fixed to normal processing
Note 2: When performing two-phase pulse signal processing, make sure the two-phase pulse
TMOD0
TMOD1
TCK0
TCK1
MR0
MR1
MR2
MR3
Symbol
TAiMR(i = 2 to 4) 0398
operation, and timer A4 is fixed to multiply-by-4 processing operation.
signal processing operation select bit (address 0384
sure to set the event/trigger select bit (addresses 0382
Two-phase pulse
processing operation
select bit (Note 1)(Note 2)
Operation mode select bit
0 (Must always be “0” when using two-phase pulse signal
processing)
0 (Must always be “0” when using two-phase pulse signal
processing)
1 (Must always be “1” when using two-phase pulse signal
processing)
0 (Must always be “0” when using two-phase pulse signal
processing)
Count operation type
select bit
Bit name
Address
16
to 039A
16
When reset
0 : Reload type
1 : Free-run type
b1 b0
0 1 : Event counter mode
0 : Normal processing operation
1 : Multiply-by-4 processing operation
00
16
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Function
16
) is set to “1”. Also, always be
16
and 0383
16
) to “00”.
M16C / 62A Group
Mitsubishi microcomputers
R
W
85