UPD78F9222CS-CAC-A Renesas Electronics America, UPD78F9222CS-CAC-A Datasheet - Page 412

• Manufacturer Part Number: UPD78F9222CS-CAC-A
• Description: MCU 8BIT 4KB FLASH 20PIN
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9222CS-CAC-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

410
3rd edition
Edition
Modification of Figure 6-20 Timing of Pulse Width Measurement Operation by Free-
Running Counter and One Capture Register (with Both Edges Specified) and Note
Modification of Figure 6-22 Timing of Pulse Width Measurement Operation with Free-
Running Counter (with Both Edges Specified) and Note
Modification of Note in Figure 6-23 Control Register Settings for Pulse Width
Measurement with Free-Running Counter and Two Capture Registers (with Rising
Edge Specified)
Modification of Figure 6-24 Timing of Pulse Width Measurement Operation by Free-
Running Counter and Two Capture Registers (with Rising Edge Specified) and Note
Modification of Figure 6-26 Timing of Pulse Width Measurement Operation by Means
of Restart (with Rising Edge Specified)
6.4.6 One-shot pulse output operation
• Modification of Caution 1 in (1) One-shot pulse output with software trigger
• Modification of Caution in (2) One-shot pulse output with external trigger
Modification of <3> and <4> in (2) 16-bit timer counter 00 (TM00) operation of 6.5
Cautions Related to 16-bit Timer/Event Counter 00
Modification of <1> in (11) One-shot pulse output by software of 6.5 Cautions Related
to 16-bit Timer/Event Counter 00
Modification of <1> in (12) One-shot pulse output with external trigger of 6.5 Cautions
Related to 16-bit Timer/Event Counter 00
Modification of <3> in (15) Capture operation of 6.5 Cautions Related to 16-bit
Timer/Event Counter 00
Modification of <1> in (19) External event counter of 6.5 Cautions Related to 16-bit
Timer/Event Counter 00
Modification of Caution in (1) 8-bit compare register 80 (CR80) of 7.2 Configuration of
8-bit Timer 80
Modification of description in (2) 8-bit timer H compare register 11 (CMP11) of 8.2
Configuration of 8-bit Timer H1
Modification of Caution 1 in 8.4.2 Operation as PWM output mode
Modification of (e) Operation by changing CMP11 (CMP11 = 02H
A5H) in Figure 8-9 Operation Timing in PWM Output Mode
Addition of description to Caution 2 in Figure 9-2 Format of Watchdog Timer Mode
Register (WDTM)
Modification of Figure 10-1 Timing of A/D Converter Sampling and A/D Conversion
Modification of Table 10-1 Sampling Time and A/D Conversion Time and Note 1
Modification of Figure 10-3 Format of A/D Converter Mode Register (ADM) and Note 2
Modification of (4) Noise countermeasures in 10.6 Cautions for A/D Converter
Modification of (6) Input impedance of ANI0 to ANI3 pins in 10.6 Cautions for A/D
Converter
Modification of Figure 11-1 LIN Transmission Operation
Modification of Figure 11-2 LIN Reception Operation and description
Addition of description to (7) Input switch control register (ISC) in 11.3 Registers
Controlling Serial Interface UART6
Modification of value in Table 11-4 Set Data of Baud Rate Generator
APPENDIX E REVISION HISTORY
User’s Manual U16898EJ6V0UD
Description
03H, CMP01 =
CHAPTER 6 16-BIT
TIMER/EVENT
COUNTER 00
CHAPTER 7 8-BIT
TIMER 80
CHAPTER 8 8-BIT
TIMER H1
CHAPTER 9
WATCHDOG TIMER
CHAPTER 10 A/D
CONVERTER
CHAPTER 11 SERIAL
INTERFACE UART6
Applied to:
(5/10)