UPD70F3735GC-GAD-AX Renesas Electronics America, UPD70F3735GC-GAD-AX Datasheet - Page 760

• Manufacturer Part Number: UPD70F3735GC-GAD-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GC-GAD-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
29.2.2 Maskable functions
29.2.3 Securement of user resources
implement each debug function. These items need to be set in the user program or using the compiler options.
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
Only reset signals can be masked.
The maskable functions with the debugger (ID850QB) and the corresponding V850ES/JF3-L functions are listed below.
The user must prepare the following to perform communication between MINICUBE2 and the target device and
(1) Securement of memory space
(2) Security ID setting
The shaded portions in Figure 29-4 are the areas reserved for placing the debug monitor program, so user
programs and data cannot be allocated in these spaces. These spaces must be secured so as not to be used by
the user program.
The ID code must be embedded in the area between 0000070H and 0000079H in Figure 29-4, to prevent the
memory from being read by an unauthorized person. For details, refer to 29.3 ROM Security Function.
NMI0
NMI1
NMI2
STOP
HOLD
RESET
WAIT
Maskable Functions with ID850QB
Table 29-4. Maskable Functions
Reset signal generation by RESET pin input
Corresponding V850ES/JF3-L Functions
CHAPTER 29 ON-CHIP DEBUG FUNCTION
−
−
−
−
−
−
Page 744 of 816