UPD70F3743GJ-GAE-AX Renesas Electronics America, UPD70F3743GJ-GAE-AX Datasheet - Page 691

• Manufacturer Part Number: UPD70F3743GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3743GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 128
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JJ3
19.4.2 Restore
address.
R01UH0016EJ0400 Rev.4.00
Sep 30, 2010
Restoration from software exception processing is carried out by the RETI instruction.
By executing the RETI instruction, the CPU carries out the following processing and shifts control to the restored PC's
<1> Loads the restored PC and PSW from EIPC and EIPSW because the PSW.EP bit is 1.
<2> Transfers control to the address of the restored PC and PSW.
The processing of the RETI instruction is shown below.
Caution When the EP and NP bits are changed by the LDSR instruction during the software exception
Remark
processing, in order to restore the PC and PSW correctly during recovery by the RETI
instruction, it is necessary to set the EP bit back to 1 and the NP bit back to 0 using the LDSR
instruction immediately before the RETI instruction.
The solid line shows the CPU processing flow.
1
Original processing restored
PC
PSW
RETI instruction
Figure 19-10. RETI Instruction Processing
PSW.EP
PSW.NP
CHAPTER 19 INTERRUPT/EXCEPTION PROCESSING FUNCTION
0
0
EIPC
EIPSW
1
PC
PSW
FEPC
FEPSW
Page 675 of 892