PXAG37KBA,512 NXP Semiconductors, PXAG37KBA,512 Datasheet - Page 33

• Manufacturer Part Number: PXAG37KBA,512
• Description: IC XA MCU 16BIT 32K OTP 44-PLCC
• Manufacturer: NXP Semiconductors
• Series: XAr

Specifications of PXAG37KBA,512

• Core Processor: XA
• Core Size: 16-Bit
• Speed: 30MHz
• Connectivity: UART/USART
• Peripherals: PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: OTP
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-PLCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Other names: 568-1095-5; 935263501512; PXAG37KBA

1. P – programmed. U – unprogrammed.
2. Any other combination of the security bits is not defined.
Philips Semiconductors
EPROM CHARACTERISTICS
The XA-G37 is programmed by using a modified Improved
Quick-Pulse Programming
the same as that used by the later 80C51 family EPROM parts.
However different pins are used for many programming functions.
Detailed EPROM programming information may be obtained from
the internet at www.philipsmcu.com/ftp.html.
The XA-G37 contains three signature bytes that can be read and
used by an EPROM programming system to identify the device. The
signature bytes identify the device as an XA-Gx manufactured by
Philips.
Table 6. Program Security Bits
NOTES:
2002 Mar 25
Trademark phrase of Intel Corporation.
XA 16-bit microcontroller family
32K OTP, 512 B RAM, watchdog, 2 UARTs
1
2
3
4
PROGRAM LOCK BITS
SB1
U
P
P
P
SB2
U
U
P
P
algorithm. This algorithm is essentially
SB3
U
U
U
P
PROTECTION DESCRIPTION
No Program Security features enabled.
MOVC instructions executed from external program memory are disabled from fetching code bytes
from internal memory and further programming of the EPROM is disabled.
Same as 2, also verify is disabled.
Same as 3, external execution is disabled. Internal data RAM is not accessible.
31
Security Bits
With none of the security bits programmed the code in the program
memory can be verified. When only security bit 1 (see Table 6) is
programmed, MOVC instructions executed from external program
memory are disabled from fetching code bytes from the internal
memory. All further programming of the EPROM is disabled. When
security bits 1 and 2 are programmed, in addition to the above,
verify mode is disabled. When all three security bits are
programmed, all of the conditions above apply and all external
program memory execution is disabled. (See Table 6)
XA-G37
Product data