MC68HC908GP32CFB Freescale Semiconductor, MC68HC908GP32CFB Datasheet - Page 345

• Manufacturer Part Number: MC68HC908GP32CFB
• Description: IC MCU 8MHZ 32K FLASH 44-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GP32CFB

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFP
• For Use With: M68EVB908GP32 - BOARD EVALUATION FOR HC908GP32
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

22.4 Pin Name Conventions
22.5 Functional Description
MC68HC908GP32
MOTOROLA
NOTE:
•
MC68HC08GP32
The text that follows describes both timers, TIM1 and TIM2. The TIM
input/output (I/O) pin names are T[1,2]CH0 (timer channel 0) and
T[1,2]CH1 (timer channel 1), where “1” is used to indicate TIM1 and “2”
is used to indicate TIM2. The two TIMs share four I/O pins with four
port D I/O port pins. The full names of the TIM I/O pins are listed in
Table
References to either timer 1 or timer 2 may be made in the following text
by omitting the timer number. For example, TCH0 may refer generically
to T1CH0 and T2CH0, and TCH1 may refer to T1CH1 and T2CH1.
Figure 22-1
the TIM is the 16-bit TIM counter that can operate as a free-running
counter or a modulo up-counter. The TIM counter provides the timing
reference for the input capture and output compare functions. The TIM
counter modulo registers, TMODH:TMODL, control the modulo value of
the TIM counter. Software can read the TIM counter value at any time
without affecting the counting sequence.
The two TIM channels (per timer) are programmable independently as
input capture or output compare channels. If a channel is configured as
input capture, then an internal pullup device may be enabled for that
channel.
Pin Names:
TIM Generic Pin Names:
Full TIM
22-1. The generic pin names appear in the text that follows.
—
(See 16.6.3 Port D Input Pullup Enable
Rev. 6
Timer Interface Module (TIM)
shows the structure of the TIM. The central component of
Table 22-1. Pin Name Conventions
TIM1
TIM2
PTD4/T1CH0
PTD6/T2CH0
T[1,2]CH0
Timer Interface Module (TIM)
Register.)
Pin Name Conventions
PTD5/T1CH1
PTD7/T2CH1
T[1,2]CH1
Technical Data
343