MC68HC908GP32CFB Freescale Semiconductor, MC68HC908GP32CFB Datasheet - Page 82

• Manufacturer Part Number: MC68HC908GP32CFB
• Description: IC MCU 8MHZ 32K FLASH 44-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GP32CFB

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFP
• For Use With: M68EVB908GP32 - BOARD EVALUATION FOR HC908GP32
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Resets and Interrupts
4.4.2.1 SWI Instruction
4.4.2.2 Break Interrupt
4.4.2.3 IRQ Pin
4.4.2.4 CGM
4.4.2.5 TIM1
Technical Data
80
NOTE:
The software interrupt instruction (SWI) causes a non-maskable
interrupt.
A software interrupt pushes PC onto the stack. An SWI does not push
PC – 1, as a hardware interrupt does.
The break module causes the CPU to execute an SWI instruction at a
software-programmable break point.
A logic 0 on the IRQ pin latches an external interrupt request.
The CGM can generate a CPU interrupt request every time the phase-
locked loop circuit (PLL) enters or leaves the locked state. When the
LOCK bit changes state, the PLL flag (PLLF) is set. The PLL interrupt
enable bit (PLLIE) enables PLLF CPU interrupt requests. LOCK is in the
PLL bandwidth control register. PLLF is in the PLL control register.
TIM1 CPU interrupt sources:
•
•
TIM1 overflow flag (TOF) — The TOF bit is set when the TIM1
counter reaches the modulo value programmed in the TIM1
counter modulo registers. The TIM1 overflow interrupt enable bit,
TOIE, enables TIM1 overflow CPU interrupt requests. TOF and
TOIE are in the TIM1 status and control register.
TIM1 channel flags (CH1F–CH0F) — The CHxF bit is set when an
input capture or output compare occurs on channel x.
The channel x interrupt enable bit, CHxIE, enables channel x
TIM1 CPU interrupt requests. CHxF and CHxIE are in the TIM1
channel x status and control register.
Resets and Interrupts
MC68HC908GP32
•
MC68HC08GP32
MOTOROLA
—
Rev. 6