LD2985BM50R STMicroelectronics, LD2985BM50R Datasheet - Page 15

• Manufacturer Part Number: LD2985BM50R
• Description: IC REG LDO 5.0V 150MA SOT23-5L
• Manufacturer: STMicroelectronics

Specifications of LD2985BM50R

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 16V
• Voltage - Dropout (typical): 0.28V @ 150mA
• Number Of Regulators: 1
• Current - Output: 150mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 16 V
• Output Voltage: 5 V
• Output Type: Fixed
• Dropout Voltage (max): 575 mV
• Output Current: 150 mA
• Line Regulation: 0.014 % / V
• Voltage Regulation Accuracy: 2.5 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-3500-2

6.6
Figure 17. Reverse current test circuit
Reverse current
The power transistor used in the LD2985 has not an inherent diode connected between the
regulator input and output. If the output is forced above the input, no current will flow from
the output to the input across the series pass transistor. When a V
the output, the reverse current measured flows to the GND across the two feedback
resistors. This current typical value is 160 µA. R
typical values are, respectively, 42.6 kΩ and 51.150 kΩ.
1
and R
2
resistors are implanted type;
REV
voltage is applied on
15/21