E3X-DA14V Omron, E3X-DA14V Datasheet - Page 6

• Manufacturer Part Number: E3X-DA14V
• Description: DIGTL NPN NANO CONN READY MDL
• Manufacturer: Omron
• Series: E3X-DA-Nr

Specifications of E3X-DA14V

• Amplifier Type: Water Resistant
• Voltage - Supply: 12 V ~ 24 V
• Output Type: NPN
• Current - Supply: 40mA
• Mounting Type: DIN Rail
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E3XDA14V

Ratings and Specifications
Amplifiers
Pre-wired Amplifiers
Item
Light source
(wavelength)
Power supply voltage
Power consumption
Con-
trol
output
Protection circuit
Re-
sponse
time
Sensitivity setting
Func-
tions
Indicators
Display timing
Display orientation
Optical axis adjust-
ment
Ambient illumination
(receiver side)
Output
ON/OFF
output
Monitor
output
Super-high-
speed mode
Standard
mode
Super-long-
distance
mode
Timer func-
tion
Automatic
power con-
trol (APC)
Zero-reset
Initial reset
Monitor fo-
cus
type
http://www.ia.omron.com/
output
output
Type
NPN
PNP
Red LED (660 nm)
12 to 24 VDC±10%, ripple (p-p) 10% max.
Normally: 960 mW max. (current consumption: 40 mA max. at power supply voltage of 24 VDC)
Eco Mode: 720 mW max. (current consumption: 30 mA max. at power supply voltage of 24 VDC)
Digital display not lit: 600 mW max. (current consumption: 25 mA max. at power supply voltage of 24 VDC)
Load current: 50 mA (residual voltage (NPN/PNP): 1 V max.,
Open collector (NPN or PNP output, depending on the model)
Light ON/Dark ON selectable
Power supply reverse polarity, Output short-circuit protection, Mutual interference prevention (supported for up to 10
Units)
0.25 ms for operation and reset respectively
1 ms for operation and reset respectively
4 ms for operation and reset respectively
Teaching or manual method
OFF-delay timer: 0 to 200 ms, 1 to 20 ms (set in 1-ms units); 20 to 200 ms (set in 5-ms units)
Using Mobile Console: OFF delay, ON delay, or one shot (selectable)
Fiber-optic current digital
control
Negative values can be displayed.
Settings can be returned to defaults as required.
Operation indicator (orange), 7-segment digital incident level display (red), 7-segment digital incident level percentage
display (red), threshold and excess gain 2-color double bar indicators (green and red), 7-segment digital threshold
display (red)
Switching between normal/peak-hold/bottom-hold possible
Switching between normal/reverse possible
Optical axis adjustment possible (hyper-flashing function)
Incandescent lamp: 10,000 lx max.
Sunlight: 20,000 lx max.
Standard
E3X
-DA11-N
E3X
-DA41-N
models
---
---
Load 1 to
5 VDC,
10 kΩ min.
Upper and
lower limits
can be set as
required for
every 100
digital values.
Monitor-
output
models
E3X
-DA21-N
E3X
-DA51-N
Blue LED
(470 nm)
E3X
-DAB11-N
E3X
-DAB41-N
Mark-detecting models
Green LED
(525 nm)
E3X
-DAG11-N
E3X
-DAG41-N
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
---
Infrared LED
(870 nm)
E3X
-DAH11-N
E3X
-DAH41-N
Infrared
models
---
---
For dimensions, refer to page 26 to 29.
Red LED (660 nm)
Fiber-optic current digital control
resistant
E3X
-DA11V
E3X
-DA41V
models
Water-
E3X-DA-N
0.5 ms for
operation and
reset
respectively
2 ms for
operation and
reset
7 ms for
operation and
reset
respectively
Twin-output
models
E3X
-DA11TW
E3X
-DA41TW
6