DK-DEV-4SGX530N Altera, DK-DEV-4SGX530N Datasheet - Page 43

• Manufacturer Part Number: DK-DEV-4SGX530N
• Description: KIT DEVELOPMENT STRATIX IV
• Manufacturer: Altera
• Series: Stratix® IV GXr
• Type: FPGAr

Specifications of DK-DEV-4SGX530N

• Contents: Board, Cable, Documentation, Power Supply
• For Use With/related Products: Stratix® IV GX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2714

Chapter 6: Board Test System
Using the Board Test System
August 2010 Altera Corporation
SDI
Testing the SDI requires connecting a SMB loopback cable as shown in
Figure 6–9. Board with SMB Loopback Cable
Once connected, the following controls are available:
■
■
■
■
Reset—Restarts the test.
Load—Passes a new seed value to the PRBS generator on the device.
Status—Displays the following status information during the loopback test:
■
■
■
Error control—Provides the following controls to display data errors detected
during analysis and allow you to insert errors:
■
■
■
Tx PLL—Shows whether the Tx PLL is locked or unlocked.
Rx PLL—Shows whether the Rx PLL is locked or unlocked.
Error status—Shows “No Error Detected” when the test is running correctly;
otherwise shows pertinent error.
Errors—Displays the number of errors detected in the hardware.
Insert Error—Inserts a one-word error into the transaction stream each time
you click the button.
Clear—Resets the Errors counter to zero.
Stratix IV GX FPGA Development Kit User Guide
Figure
6–9.
6–19