SLEV900/AFB NXP Semiconductors, SLEV900/AFB Datasheet - Page 5

• Manufacturer Part Number: SLEV900/AFB
• Description: KIT EVAL I.CODE RFID 13.56MHZ
• Manufacturer: NXP Semiconductors
• Series: ICODEr
• Type: RFID (Radio Frequency Identification)r

Specifications of SLEV900/AFB

• Contents: Reader, Antenna, Cables, Samples, Software and User Manual
• For Use With/related Products: ICODE Transponders
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 568-2231

Philips Semiconductors
6.2.2
The serial PC library crm_s32.dll is not part of the SLEV900, but is supplied by Philips as a design tool that is free of
charge and without any warranties.
6.2.3
The I-CODE demonstration software works with
Windows 95, Windows 98, and Windows NT 4.0.
Insert disk 1, start the SETUP.EXE program and follow the
instructions.
If you want to change the COM port after the software
installation, open the file ICODE.INI, in the directory where
you have installed the software, with a text editor and
modify the line COM = COMx (x = 1 or 2).
The baud rate of the reader is set to 57.6 kbaud as default.
6.2.4
The Windows Demo Software of the I-code Evaluation Kit
does not allow the changing of Block 2 (Write Access
Conditions) and of the QUIET bits in Block 3. The use of
Family Codes and/or Application Identifiers is not
supported.
7
The demonstration software shows the basic features of
the I-CODE system. To start the program double click the
I-CODE demo icon.
Table 1 Parameters in the main screen of the demonstration software
To start a command click the corresponding button in the dialogue box or press the Alt-key and the underlined character.
To exit a command, first click the Stop-button and then the Exit-button.
2002 May 23
Disk 1
Disk 2
Disk 3
1st block
# of blocks
# of labels
Enable FastMode
I-CODE Evaluation kit
PARAMETER
SOFTWARE DESCRIPTION
DISK
C
S
R
SOFTWARE
OFTWARE INSTALLATION
ONTENTS OF DISKS
ESTRICTIONS OF
SETUP.EXE
SETUP.W02
DOS_SW3.ZIP
VC6SOURCE.ZIP
first block in the user memory with which you want to start the access; the first
block in the user memory is block 4
number of blocks starting with the 1st block you want to access
maximum number of labels that will be in the antenna field
if you click at this button the I-CODE reader works in fast mode
W
INDOWS
PROGRAM
I-CODE
DEMO
installation program of WIN demo ICODE.EXE
second part of installation program
DOS demo CRMTEST3.EXE
visual C++ 6.0 source codes of WIN demo ICODE.EXE
DESCRIPTION
5
7.1
The main screen allows the user to set up some
parameters (see Table 1) and to start all supported
commands; see the buttons in the dialogue box shown in
Fig.2.
Fig.2 Main screen of demonstration software.
Main screen
DESCRIPTION
Product specification
SLEV900
EXAMPLE
4
4
8