CB-OWSPA311GI-01 ConnectBlue, CB-OWSPA311GI-01 Datasheet - Page 35

• Manufacturer Part Number: CB-OWSPA311GI-01
• Description: KIT START OEM WIRELESS LAN RS232
• Manufacturer: ConnectBlue
• Series: OEM Serial Port Adapter™r
• Type: Bluetoothr

Specifications of CB-OWSPA311GI-01

• Frequency: 2.4GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1018

ATS3 Command Line Termination Character
ATS4 Response Formatting Character
Syntax
ATS3=<line_term><CR>
ATS3?<CR>
Parameters
line_term
Responses
<CR><LF>line_term<CR><LF>OK<CR><LF>
<line_term><LF>OK<line_term><LF>
<CR><LF>ERROR<CR><LF>
Syntax
ATS4=<term><CR>
ATS4?
Parameters
term
Responses
<CR><LF>term<CR><LF>OK<CR><LF>
<CR><term>OK<CR><term>
<CR><LF>ERROR<CR><LF>
Type
Integer
Type
Integer
Description
Write command line termination character.
This setting changes the decimal value of the character recognized by the
DCE from the DTE to terminate an incoming command line. It is also gener-
ated by the DCE as part of the header, trailer, and terminator for result codes
and information text along with the S4 parameter
The previous value of S3 is used to determine the command line termination
character for entry of the command line containing the S3 setting command.
However, the result code issued shall use the value of S3 as set during the
processing of the command line. For example, if S3 was previously set to 13
and the command line "ATS3=30" is issued, the command line shall be termi-
nated with a CR, character (13), but the result code issued will use the charac-
ter with the ordinal value 30 in place of the CR.
Read command line termination character.
Description
Write response formatting character.
This setting changes the decimal value of the character generated by the DCE
as part of the header, trailer, and terminator for result codes and information
text, along with the S3 parameter.
If the value of S4 is changed in a command line, the result code issued in re-
sponse to that command line will use the new value of S4.
Read response formatting character.
Description
0…127 (13, CR is default)
Description
0…127 (10, LF is default)
Description
Successful read response
Successful response
Error response
Version 1.6.6 - 2009-11
Description
Successful read response
Successful response
Error response
35