CB-OWSPA311GI-01 ConnectBlue, CB-OWSPA311GI-01 Datasheet - Page 37

• Manufacturer Part Number: CB-OWSPA311GI-01
• Description: KIT START OEM WIRELESS LAN RS232
• Manufacturer: ConnectBlue
• Series: OEM Serial Port Adapter™r
• Type: Bluetoothr

Specifications of CB-OWSPA311GI-01

• Frequency: 2.4GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1018

3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018-3021
3022
3023
0…65535 (default 200)
WLAN scan type.
0 = Active scan (default)
1 = Passive scan
WLAN lower RSSI trigger value to trigger a rescan. In dBm + offset 128
38…113 (default 38) (-90 dBm …-15 dBm, default -90 dBm)
Averaging depth for the RSSI trigger
0…16 (default 16, 0 means no depth)
WLAN lower lost beacon value to trigger a rescan.
The maximum number of lost beacons before a rescan happens.
1…32 (default 30)
Averaging depth for the lost beacon trigger
1…32 (default 32)
Deprecated, do not modify.
Deprecated, do not modify.
Beacon Period of the BSS Descriptor of the ESS to Join or Start a network in IBSS. Value in
milliseconds.
100 (default 100)
The time limit, in units of beacon intervals, after which the Join procedure will be terminated.
1…100 (default 20)
Turns DTPA (Dynamic Transmit Power Adaptation) On and off.
0…1 (default 1)
Max power (See also AT*AMMP Max output power).
Valid range 128…145
Max association power. The maximum transmit power used during the association phase. This
value is interpreted just as the AT*AMMP Max output power AT command.
128…145 (default 145)
Enable Bluetooth co-existence pins on module.
0 = Pins disabled (default)
1 = Pins enabled
Enable internal pull-down resistors on Bluetooth coexistence pins on module. Only used if
S3016=1.
0 = Pull-downs disabled (default)
1 = Pull-downs enabled
Reserved, do not modify.
Enable DTIM in power save. If DTIM is enabled and module in power save, the access point
sends an indication when new data is available. If disabled the module polls for data every
beacon listen interval (beacon listen interval is configured in S register 3001).
0 = DTIM disabled
1 = DTIM enabled (default)
QoS enable.
0 = Disabled (default)
Version 1.6.6 - 2009-11
37